*A2DP (Advanced Audio Distribution Prole) is a technology enabling to
stream stereo sound from an audio source (phone, pc, laptop, tablet, MP3
player) to a stereo speaker or headset via Bluetooth. To do so both devices
must support this prole.
Using the SUPERTOOTH DISCO 3 with your
Bluetooth A2DP phone / device
Important : The DISCO 3 needs to be “paired” with your
Bluetooth A2DP phone / device rst. Please refer to “Pairing
the SUPERTOOTH DISCO 3 with your Bluetooth A2DP phone /
device” section.
Reconnecting the SUPERTOOTH DISCO 3 with a Bluetooth
A2DP phone / device already paired
When you turn it on, the DISCO 3 reconnects automatically
with the latest paired device. When you leave the Bluetooth
operating range, with the DISCO 3 turned ON, it disconnects.
When you come back into the Bluetooth operating range,
press the Play / Pause Button (3) for 1 second to reconnect the
latest paired device. The DISCO 3 beeps twice.
Streaming music from a Bluetooth A2DP phone / device
1. Go to your device music player and play a track by pressing
“Play” or the Play / Pause Button (3) for 1 second. If the
DISCO 3 is connected, the music will be heard directly in the
speaker. See your device manual if needed.
2. Audio is now on the DISCO 3. The Play / Pause Indicator (3)
turns steady white, indicating that the device is connected
and streaming music via the DISCO 3.
3. When it is connected, you can control the music using the
buttons of the DISCO 3. Please refer to “SUPERTOOTH
DISCO 3 Button Functions” section.
Using the SUPERTOOTH DISCO 3 with a non
Bluetooth A2DP Mp3 Player
You can connect directly an Mp3 player via the Stereo Line
Input (9) situated at the back of the DISCO 3.
Connecting di rec tly non Bluetooth A2DP Mp3 player with
the SUPE RTOOTH DISCO 3
1. Plug one end of the supplied audio cable into the Stereo
Line Input (9) and the other end into the output of your
music player.
2. Press “Play” on your Mp3 player to stream music directly via
the DISCO 3.
3. Non Bluetooth devices won’t support Play / Pause / Previous
/ Next commands from the DISCO 3. Please use the buttons
of your Mp3 player directly.
The Bluetooth® wor
marks by Euro- CB is under license. Other trademarks and trade names are those of their respective owners.
The aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX
logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
DISC
USER GUIDE
The SUPERTOOTH DISCO 3 is a portable, wireless stereo
speaker featuring an avant-garde design and compact
footprint.
Users can stream music wirelessly from any cell phone,
tablet, computer, laptop or Mp3 player supporting
Bluetooth A2DP.
The SUPERTOOTH DISCO 3 kicks out 12 watts RMS audio
power, with two high eciency speakers on the front
and a bass reex system situated at the back of the unit.
The integrated rechargeable battery ensures 3 to 4
hours of non-stop, maximum-volume music, and up to
15 hours of moderately played melodies.
The SUPERTOOTH DISCO 3 comes with a 3.5 mm stereo
jack cable for devices that do not support Bluetooth
A2DP.
Charging
1. Connect the USB Cable to the DC 5V USB Input (7) found at
the back of the DISCO 3 then connect the other end of the
USB Cable to your Computer or USB power supply.
2. The Charge Indicator (8) is steady red while charging.
Charging is complete when the Charge indicator (8) goes
green.
Turning the SUPERTOOTH DISCO 3 On and O
Power On : Press and hold the On / O Button (6) for 2 seconds.
A power on beep is heard in the speaker, Play / Pause Indicator
(3) will blink for 2 seconds.
Note 1 : At rst time use, when you turn it on, the DISCO 3 goes
to pairing mode automatically (ready to be paired with your
phone / device).
Note 2 : If you are not playing music, the DISCO 3 goes to
standby mode automatically after a few seconds. To check it is
turned on, press any button. Play / Pause Indicator (3) will ash.
Power O : Press and hold the On / O Button (6) for 3 seconds.
A power o beep is heard in the speaker.
Pairing the SUPERTOOTH DISCO 3 with your
Bluetooth A2DP phone / device.
Pair the DISCO 3 to your phone / device to create the link or
audio connection between the two. Pairing should be done at
rst connection to a phone / device.
Important : Make sure that your phone / device supports A2DP*
(Advanced Audio Distribution Prole) before proceeding.
1. If the Disco 3 is o, press the On / O button (6) for 2 seconds,
to switch it on.
2. If this is the rst time you are turning on the Disco 3, the Play /
Pause (3) button blinks red fast. This indicates that the DISCO
3 is ready to be pair.
If the Play / Pause button (3) is not fast blinking red, press and
hold the Play / Pause button (3) for 3 seconds (until the unit
beeps twice). The Play / Pause button (3) should blink red
now and the Disco 3 is ready to pair.
3. While the DISCO 3 is in pairing mode, access the Bluetooth
menu of your device. Turn on its Bluetooth function then
execute a Bluetooth search to nd the DISCO 3. (See your
device manual).
4. When your device displays the list of Bluetooth devices, select
ST DISCO3.
5. If your device asks for the password / pin code, enter 0000 and
press OK.
6. The Disco 3 beeps twice. It is ready to use with your device.
Federal Communications C
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible
for compliance could void the user’s authority to opera te the equipment .
15.105(b)
This equipment
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable
protection against t genera t
uses can radiat frequenc if not used in cc ordance
the instructions, may cause ha rmful interference to radio
guarantee that in
harmful inter to radio reception, which
can be by turning
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separa tion between the equipment and receiver
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)
Opera tion is subject to the following two conditions :
1) This device may not cause interference and
2) This devic e must acc ept an y interference , including interferenc e tha t ma y cause undesir
opera tion of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set f
environment. End users must follow the specic operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter
Correct Disposal of This Pr
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European ies with sepa rate
systems). This marking shown on the product or its literature,
be disposed with other household wastes at the
end of its working life. T
possible harm to the environmen
please separa te this from other types of wastes and recycle it responsibly to p romote the
sustainable reuse of m aterial . Household users should contact either the retailer where
they purchased this product, or their local government oce, for details of wher e and ho w they
can take this item for environmentally safe r
Business users
contract. This product
This product
remove this may cause inju r and damage contact
recycling embedded, non-replaceable b attery is desi gned
to last the life time of the product.
Hereby, EURO COMMUNICAXavier MARCHANT
that the SUPERTOOTH DISCO 3, MODEL
and other relevant provisions of Directive 1999/5/EC of the European Parliament and of the
Council
the mutual recognition of their c
To download the user guide in
full version please go to
www
For the whole declaration please visit : http://www
Euro Communication Equipements SAS
Route de Foix D117
11500 NEBIAS (FRANCE)
Pairing code
0 0 0 0
Pairing code
0 0 0 0
PFCutting
