(*) A2DP (Advanced Audio Distribution Prole) is a technology enabling
to stream stereo sound from an audio source (phone, PC, laptop, tablet,
Mp3 player) to a stereo speaker or headset via Bluetooth. To do so both
devices must support this prole.
Using the SUPERTOOTH DISCO 2 with your
Bluetooth A2DP phone / device
Important : The DISCO 2 needs to be “paired” with your
Bluetooth A2DP phone / device rst. Please refer to “Pairing
the SUPERTOOTH
device” section.
Reconnecting the SUPERTOOTH DISCO 2 with a
A2DP phone / device already paired
When you turn it on, the DISCO 2 reconnects automatically
with device. When Bluetooth
operating
When you come back into the Bluetooth operating range,
press the Play / Pause Button (3) for 1 second to
latest paired device. The DISCO 2 beeps twice.
Streaming music from a Bluetooth A2DP phone / device
1.
“Play” or the Play / Pause Button (3) for 1 second. If the
DISCO 2
speaker. See your phone manual if needed.
2. Audio is now on the DISCO 2. All the buttons switch on
steady
streaming music via the DISCO 2.
3.
buttons of the DISCO 2. Please refer to “SUPERTOOTH
DISCO 2 Button Functions” section.
Using the SUPERTOOTH DISCO 2 with a non
Bluetooth A2DP Mp3 Player
You can connect directly an Mp3 player the Stereo Line
Input (9) situated at the back of the DISCO 2.
Connecting di rec tly non Bluetooth A2DP Mp3 player with
the SUPE RTOOTH DISC O 2
1. Plug one end of the supplied audio cable into the Stereo
Line Input (9) and the end into the output of your
music player.
2. Press “Play”
the DISCO 2.
3. Non
/ Next commands from the DISCO 2. Please use the buttons
of your Mp3 player directly.
The Bluetooth® wor
marks by Euro- CB is under license. Other trademarks and trade names are those of their respective owners.
The aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX
logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
DISC
USER GUIDE
The SUPERTOOTH
speaker design and compact
footprint.
Users
tablet, computer, laptop or Mp3 player supporting
Bluetooth A2DP.
The SUPERTOOTH DISCO
power, with two speakers on the front and a high
eciency
unit.
The integrated rechargeable battery ensures 3 to 4
hours
10 hours of moderately played melodies.
The SUPERTOOTH
jack cable for devices that do not support Bluetooth
A2DP.
Charging
1. Connect the charger’s plug into the Charge Port (7) of the
DISCO 2. Connect the charger to an external power source.
2. The Charge Indicator (8) is steady red while charging.
Charging is complete when the Charge Indicator (8) goes
green.
Turning the SUPERTOOTH DISCO 2 On and O
Power On : Press and hold the On / (6) for 2 seconds.
A power
on and o automatically.
Note 1 : At rst time use, when you turn it on, the DISCO 2 goes
to pairing mode automatically (ready to be paired with your
phone / device).
Note 2 : If you are not playing music, the DISCO 2 goes to
standby mode automatically after a few seconds and all the
buttons switch o.
the buttons switch on and o instantaneously.
Power O : Press and hold the On / O Button (6) for 3 seconds.
A power o beep is heard in the speaker.
Pairing the SUPERTOOTH DISCO 2 with your
Bluetooth A2DP phone / device
Pair the DISCO 2 with your phone / device to create the link or
audio connection between the two. Pairing should be done at
rst connection with a phone / device.
Important : Make sure that your phone / device supports
Bluetooth
proceeding.
Note : Any other device previously paired with the DISCO 2
must be turned o, or its Bluetooth must be disabled before
proceeding.
1. The DISCO 2
Button (6) for 6 seconds until the Play / Pause Button (3)
blinks red fast. The DISCO 2 is ready to be paired.
2. DISCO in pairing the
menu of your phone. Turn on its Bluetooth function then
execute a Bluetooth to nd the DISCO 2. (See your
phone manual).
3. When
ST DISCO 2.
4.
press OK.
5. The DISCO 2 beeps twice. It is ready to use with your phone.
Federal Communications C
Industry Canada (IC) Statement
15.21
You are cautioned
for compliance could void the user’s authority to opera te the equipment .
15.105(b)
This equipment
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable
protection against harmful inter a residential installation. This equipment genera tes,
uses can radiate radio if not installed cc ordance with
the instructions, may cause harmful
guarantee that in
harmful interference to radio which
can be determined the
equipment o and on, the user is
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separa tion between the equipment and receiver
- outlet on receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Opera tion is subject to the following two conditions :
1) This device may not cause interference and
2) Tcc ept any interference,
opera tion of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set for
environment. End users must follow the specic operating instructions for satisfying RF
compliance.
antenna or transmitter
Correct Disposal of This Pr
(Waste Electrical & Electronic Equipment)
(Applicable in
systems). This marking shown on the product or its literature,
be disposed with other household w the
end of its working life. T
possible harm to the environmen
please separa te this from other types of wastes and recycle it responsibly to promote the
sustainable reuse
they
can take this item for environmentally safe r
Business users
contract. This product
This product
remove and damage contact
recycling
to last the life time of the product.
Hereby, EURO COMMUNICAXavier MARCHANT
that the SUPERTOOTH MODEL
and other relevant provisions of Directive 1999/5/EC of the European P of the
Council telecommunications terminal equipment
the mutual recognition of their conformity.
To download the user guide in
full version please go to
www
For the whole declaration please visit : http://www
Euro Communication Equipements SAS
Route de Foix D117
11500 NEBIAS (FRANCE)
Pairing code
0 0 0 0
Pairing code
0 0 0 0
PFCutting
