Bedienungsanleitung Suse openSUSE 11.3 (Seite 16 von 178) (Englisch)

488891

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

TIP: Booting from DVD on UEFI machines

►amd64 em64t: DVD1 can be used as a boot medium for machines equipped

with UEFI (Unied Extensible Firmware Interface). Refer to your vendor's documen-

tation for specic information. If booting fails, try to enable CSM (Compatibility

Support Module) in your rmware. ◄

1.2.1 Installing from a Network Server Using SLP

If your network setup supports OpenSLP and your network installation source has

been congured to announce itself via SLP (described in Section “Setting Up the

Server Holding the Installation Sources” (Chapter 1, Remote Installation, ↑Reference)),

boot the system, press [F4] in the boot screen and select SLP from the menu.

The installation program congures the network connection with DHCP and retrieves

the location of the network installation source from the OpenSLP server. If the auto-

matic DHCP network conguration fails, you are prompted to enter the appropriate

parameters manually. The installation then proceeds as described below with the

exception of the network conguration step that is needed prior to adding additional

repositories. This step is not needed as the network is already congured and active

at this point.

1.2.2 Installing from a Network Source without SLP

If your network setup does not support OpenSLP for the retrieval of network installa-

tion sources, boot the system and press [F4] in the boot screen to select the desired

network protocol (NFS, HTTP, FTP, or SMB/CIFS). Provide the server's address and

the path to the installation media.

The installation program automatically congures the network connection with DHCP.

If this conguration fails, you are prompted to enter the appropriate parameters

manually. The installation retrieves the installation data from the source specied.

The installation then proceeds as described below with the exception of the network

conguration step needed prior to adding additional repositories. This step is not

needed as the network is already congured and active at this point.

1.2.3

Installing with the openSUSE 11.3 Installer from Windows

openSUSE 11.3 Installer is a Microsoft Windows application that prepares your

computer to directly boot into the openSUSE installation without having to adjust

BIOS settings. It is only available on DVD media. To use the installer, insert the

openSUSE media under Windows. The openSUSE 11.3 Installer setup automatically

starts (if not, run openSUSE11_2_LOCAL.exe from the DVD). Choose a language for the

installation and follow the instructions on the screen. The language you choose here

is also precongured to be used for the openSUSE installation.

On the next reboot, the Microsoft Windows boot loader launches. Choose openSUSE

11.3 Installer to start the openSUSE installation. In order to proceed with the instal-

lation, you will be prompted to insert the installation media. The installation proceeds

6 Start-Up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Suse openSUSE 11.3 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info