6 Leave the conguration screen with OK.
2.4.1 Conguring an HP All-In-One Device
An HP All-In-One device can be congured with YaST even if it is connected to the
parallel port or is made available via the network. If you own a USB HP All-In-One
device, start conguring as described in Procedure 2.9, “Conguring a USB or SCSI
Scanner” (page 36). If it is detected properly and the Test succeeds, it is ready to
use.
If your USB device is not properly detected, or your HP All-In-One device is connected
to the parallel port or the network, run the HP Device Manager:
1 Start YaST and select Hardware > Scanner. YaST loads the scanner database.
2 Start the HP Device Manager with Other > Run hp-setup and follow the on-
screen instructions. After having nished the HP Device Manager, the YaST
scanner module automatically restarts the auto detection.
3 Test it by choosing Other > Test.
4 Leave the conguration screen with OK.
2.4.2 Sharing a Scanner over the Network
openSUSE allows the sharing of a scanner over the network. To do so, congure your
scanner as follows:
1 Congure the scanner as described in Section 2.4, “Setting Up a Scanner”
(page 36).
2 Choose Other > Scanning via Network.
3 Enter the hostnames of the clients (separated by a comma) that should be
allowed to use the scanner under Server Settings > Permitted Clients for
saned and leave the conguration dialog with OK.
2.4.3 Scanning over the Network
To use a scanner that is shared over the network, proceed as follows:
1 Start YaST and select Hardware > Scanner.
2 Open the network scanner conguration menu by Other > Scanning via Net-
work.
3 Enter the hostname of the machine the scanner is connected to under Client
Settings > Servers Used for the net Metadriver
Setting Up Hardware Components with YaST 37
