488888
115
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
Resizepartitionsusing the partedcommand.Find more information about this
tool at the GNU Partedwebsite
http://www.gnu.org/software/parted/parted
.html
.
The rescuesystemcan be loaded from various sources and locations.The simplest
option is to boot the rescue systemfrom the original installation medium:
1 Insertthe installationmediuminto your DVD drive.
2 Rebootthe system.
3 At thebootscreen, press[
F4
] and choose DVD-ROM. Then choose Rescue
System from the main menu.
4
Enter
root
at the
Rescue:
prompt.A password is not required.
If your hardware setupdoesnot includea DVD drive, you can boot the rescue
systemfrom a networksource (including the openSUSEFTP server). The following
example applies to a remote boot scenario—ifusing another boot medium, such
as a DVD,modify the
info
file accordingly and bootas you wouldfora normal in-
stallation.
1Enter the configuration of your PXE boot setup and add the lines
install= protocol:// instsource
and
rescue=1
. If you need to startthe repair
system, use
repair=1
instead.As with a normal installation,
protocol
stands
for any of the supportednetworkprotocols (NFS, HTTP, FTP, etc.) and
instsource
for the path to your network installation source.
2 Boot thesystemusing“Wake on LAN”, as describedin Section“Wake on LAN”
(Chapter2, Remote Installation, ↑Reference).
3
Enter
root
at the
Rescue:
prompt.A password is not required.
Once you have entered the rescuesystem,you can make use of the virtual consoles
that can be reached with[
Alt
] +[
F1
] to[
Alt
] +[
F6
].
A shell and many otherusefulutilities,such as the mount program,are available in
the
/bin
directory. The
sbin
directory contains important file and networkutilities
for reviewingand repairing the file system. This directory also containsthe most
important binaries for system maintenance,such as fdisk, mkfs, mkswap,mount,
mount, init, and shutdown,and ifconfig, ip, route, and netstatfor maintaining the
network. The directory
/usr/bin
containsthe vi editor,find, less, and ssh.
To see the system messages,either use the command
dmesg
or viewthe file
/var/
log/messages
.
Helpand Troubleshooting 107
115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Suse OpenSUSE 11.4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Suse OpenSUSE 11.4

Suse OpenSUSE 11.4 Bedienungsanleitung - Englisch - 658 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info