488889
51
Zoom out
Zoom in
Vorherige Seite
1/530
Nächste Seite
General Network Settings
Enable or disable the use of NetworkManager as described above. Also change the
IPv6 support here. By default the IPv6 support is enabled. To disable it, click Dis-
able IPv6. For more information about IPv6, see Section 13.2, “IPv6—The Next
Generation Internet” (page 230).
Firewall
By default SuSEFirewall2 is enabled on all congured network interfaces. To
globally disable the rewall for this computer, click on Disable. If the rewall is
enabled, you may Open the SSH port in order to allow remote connections via secure
shell. To open the detailed rewall conguration dialog, click on Firewall. See
Section “Conguring the Firewall with YaST” (Chapter 13, Masquerading and
Firewalls, ↑Security Guide) for detailed information.
Network Interfaces
All network cards detected by YaST are listed here. If you have already set up a
network connection during the installation (as described in Section 1.7.1.1, “Network
Setup” (page 16)) the card used for this connection is listed as Congured. A click
on Network Interfaces opens the Network Settings dialog, where you can change
existing congurations, set up networks cards not congured yet, or add and con-
gure additional cards.
DSL Connections, ISDN Adapters, and Modems
If your computer is equipped with an internal DSL modem, an internal ADSL Fritz
Card, an ISDN card or a modem, clicking on the respective headline opens the
conguration dialog.
VNC Remote Administration
To enable remote administration of your machine via VNC, click VNC Remote
Administration. Choose Allow Remote Administration in the following dialog and
adjust your rewall settings accordingly.
Proxy
If you have a proxy server controlling the Internet access in your network, congure
the proxy URLs and authentication details in this dialog.
TIP: Resetting the Network Conguration to the Default Values
Reset the network settings to the original proposed values by clicking Change
> Reset to Defaults. This discards any changes made.
Installation with YaST 33
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Suse openSUSE 12.2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Suse openSUSE 12.2

Suse openSUSE 12.2 Kurzanleitung - Englisch - 284 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info