Bedienungsanleitung Suunto FOOT POD (Seite 3 von 8) (Englisch)

542552

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

1. INTRODUCTION

Suunto Foot POD is an accessory for your Suunto t3, Suunto t4 or Suunto

t6 heart rate monitor. It is a light-weight, wireless speed and distance

sensor suitable for activities where footsteps are taken in an even stride,

such as running, jogging or walking.

It measures speed and distance by tracking and recreating the motion of the

foot in the air. Unlike conventional pedometers, it measures each stride

individually. Therefore, it displays the correct speed and distance information

even when you vary your stride length, for example, when running uphill or

downhill.

Unlike the GPS, the Suunto Foot POD functions both outdoors and indoors

because it measures the stride length with built-in acceleration sensors.

It is firmly attached to your shoe laces with an easy-to-use clip ensuring that it

does not become loose even when running in demanding conditions.

When paired with your Suunto t3, t4 or t6 heart rate monitor and properly

calibrated, Suunto Foot POD measures your distance and speed information

accurately and effortlessly.

NOTE: Suunto Foot POD does not get an accurate reading with activities

involving fast acceleration, turns, jumps, side steps and abrupt halts, for

example, racquet sports.

NOTE: The heart rate monitor functions related to the use of your Suunto Foot

POD are explained in the individual Suunto t3, t4 and t6 instruction manuals.

You can download the latest versions of the manuals at www.suunto.com/

training.

2. ATTACHING THE FOOT POD

Attach the Foot POD to the laces of your running shoes as follows:

1. Remove the POD from the clip.

2. Attach the clip by sliding it under the laces.

3. Tighten the laces.

4. Attach the POD to the clip. (To ensure accurate measurement, make sure the

device is not tilted to left or right and cannot move around.) .

To remove the Foot POD from your shoe, press down firmly on the front tips of

the clip one after the other to disengage the POD. Loosen the shoe laces and

remove the clip.

3. BEFORE USE

3.1. ACTIVATING AND DEACTIVATING THE FOOT POD

The Foot POD reacts to motion. It turns on automatically by, for example,

stumping or striding. This is indicated by 3 blinks of the red LED.

The Foot POD turns off automatically after being inactive for 30 minutes. This is

indicated by 2 blinks of the red LED.

3.2. PAIRING YOUR FOOT POD

Before you can use your Suunto Foot POD, you have to pair it with your Suunto

heart rate monitor. This is only necessary when you use your Foot POD for the

first time.

To pair your Foot POD with your Suunto heart rate monitor:

1. In your Suunto t3 or Suunto t4, go to Training mode settings and select Pair

a POD and then Foot. Then, press the Mode button. The message ‘TURN ON

FOOT’ is displayed.

In your Suunto t6, go to the Training menu and select Pair and then Foot

POD (if your device has a serial number 50500000 or higher) or Spd sens (if

your device has a serial number 50499999 or lower). The message ‘TURN ON

NEW DEVICE’ is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Suunto FOOT POD Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Suunto FOOT POD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info