Bedienungsanleitung Swan SK32020 (Seite 6 von 12) (Englisch)

664339

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

HOW TO USE

Brewing with Powder Coffee

1. Open the water reservoir cover.

2. Fill the desired amount of water into the water reservoir. On the water level indication, you

can see how many cups of water you have already filled in the water reservoir.

3. Always fill the water reservoir with at least two up to a maximum of 10 cups of water.Then

close the water reservoir cover.

4. Open the filter compartment by pressing the unlocking button on the side of the device.

5. Place the filter compartment insert and the permanent filter into the filter compartment.

Make sure that all parts are placed in correctly as otherwise the coffee machine will

not start the brewing procedure.

6. Pour the coffee powder into the permanent filter and close the filter compartment.

7. Place the coffee pot on the hotplate.

8. Press the Grind Off button to switch off the grinding mechanism of the coffee machine.

The Grind Off button lights up.

9. Press the On/Off button to switch on the device. The On/Off button lights up.

10. As soon as you have pressed the On/Off button, the brewing procedure begins.

11. After the brewing procedure, you can take the coffee pot from the hotplate and serve the

coffee.

12. After the brewing procedure, the hotplate remains on for another two hours and then

switches off automatically.

13. If you would like to turn off the coffee machine before the two hours are up, press the On/

Off button.

14. Clean the device after use (see the “Maintenance” chapter).

15. The coffee machine has a non-drip valve. You can also take the coffee pot from the hotplate

during the brewing procedure and pour yourself a cup of coffee. But be careful: You should

place the coffee pot back on the hotplate within 20 seconds to prevent the coffee filter

from overflowing with water!

Timer Function

The cof fee machine has an automatic coffee brewing function. You can select a star ting time

at which the coffee machine automatically starts the brewing procedure. To do so, take the

following steps.

1. Fill the coffee machine as described in the “Brewing Coffee with Freshly Ground Beans”

and “Brewing with Powder Coffee” sections according to whether you would like to brew

coffee with freshly ground beans or with powder coffee.

2. You should now set the starting time at which the coffee machine automatically starts

the brewing procedure by pressing the Programme button for 3 seconds until the pro-

gramme button flashes. Now set the automatic starting time using the Hour and Minute

buttons.

3. Press the Programm button again to confirm your entry. The Programm button will now

light up without flashing.

4. The current time then appears on the display again.

5. The brewing or grinding procedure now starts at the set time

SK32020N_IM.indd 6 14/10/2014 07:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Swan SK32020 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info