53171
25
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
802.11g Wireless Router User’s Manual
24
Configuring the basic wireless settings
Follow the instructions below to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Connect to the wireless router at its default IP address of http://192.168.62.1, or using whatever LAN
IP address you have set up.
2. Click
“Advanced Setup”
, then key-in default user name of
“admin
and default password of
“1234”
,
or using whatever password you have set up.
3. Click “LAN” in the main menu, and then click “Wireless”.
4. Make sure the box next to “Enable Wireless” is checked.
5. Keep the default setting on Mode setting, which is “MIXED”.
6. Choose a suitable description name for the wireless network name (ESSID) or keep it default. In the
ESSID box, enter a value of up to 32 alphanumeric characters.
7. Set the Channel or keep it default. The default channel is 6.
8. Keep all other fields in default settings.
9. Click “APPLY” button to save your changes.
10. Configure and test your PCs for wireless connectivity. Check the wireless adapter of your PCs to have
a wireless link and are able to obtain an IP address by DHCP from the wireless router.
Once your PCs have basic wireless connectivity to the wireless router, then you can configure the advanced
wireless security functions of the wireless router.
Configuring WEP
Follow the instructions below to set up WEP data encryption:
Important! If you use a wireless PC to configure WEP settings, you will be disconnected when you click
on APPLY. You must then either configure your wireless adapter to match the Router WEP settings or
access the Router from a wired PC to make any further changes.
1. Connect to the wireless router at its default IP address of http://192.168.62.1, or using whatever LAN
IP address you have set up.
2. Click “Advanced Setup”, then key-in default user name of “admin” and default password of “1234”,
or using whatever password you have set up.
3. Click “LAN” in the main menu, and then click “Wireless”.
4. Click “Security Setting”.
5. Check the box next to
“Enable”, and click “Set
WEP Keys”.
6. Form the setup screen, select
the level of WEP encryption
you wish to use, 64 Bit or 128
Bit.
7. You can automatically or
manually program the
encryption keys. These values
must be identical on all PCs
and wireless router.
- Automatic: Enter a word or group of printable characters in the Passphrase box and click the
Generate button. These characters are case sensitive.
- Manually: There are two different key formats, Alphanumeric (also called ASCII) and
Hexadecimal
. For 64-bit WEP, enter 5 characters in Alphanumeric format, or 10 digits (any
combination of 0-9, a-f, or A-F) in Hexadecimal format. For 128-bit WEP, enter 13 characters in
Alphanumeric format, or 26 digits (any combination of 0-9, a-f, or A-F) in Hexadecimal format.
- Default TX Key: Select which WEP Key (1~4) will be used when the Router sends data. Make
sure the receiving device is using the same key.
8. Click “Apply” button to save your settings.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sweex IEEE 802.11g Wireless Router wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info