Warranty
In case you need support during setup or usage of your
product you will find the relevant contact details on the
following website: www.swisstone.de.
If you detect a defect resulng from manufacturing
and/or material faults within 24 months from purchase,
please contact your dealer. The warranty does not apply
for improper treatment or failure to comply with
informaon contained in this user guide, for
interference on device executed by dealer or user (e. g.
installaons, soware downloads,…) and for total loss.
Furthermore it does not apply to ingress of liquids, use
of force, non‐maintenance, improper operaon or other
circumstances caused by the user. It also does not apply
to failure caused by a thunderstorm or any other
voltage fluctuaons. The manufacturer reserves the
right in this case to charge the customer for
replacement or repair. For wear parts such as baeries
or casing a restricted warranty period of 6 months is
valid. Manuals and possibly supplied soware are
excluded from this warranty. Further or other claims
arising from the manufacturer’s warranty are excluded.
Thus, there is no liability claim for business interrupon,
loss of profits, loss of data, addionally installed
soware by user or other informaon. The receipt with
purchase date forms the warranty proof.
Correct disposal of baeries in this product
(Applicable in countries with separate collecon
systems)
The marking on the baery, manual or packaging
indicates that the baery in this product should not be
disposed of with other household waste. Where
marked, the chemical symbols Hg, Cd or Pb indicate
that the baery contains mercury, cadmium or lead
above the reference levels in EC Direcve 2006/66. If
baeries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material
reuse, please separate baeries from other types of
waste and recycle them through your local, free baery
return system.
Declaraon of Conformity
We hereby declare that the radio equipment
type swisstone SW 320 HR is in compliance
with Direcves:
2014/53/EU and 2011/65/EC (RoHS).
A copy of the Declaraon of Conformity is available at
www.swisstone.de.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collecon
systems)
This marking on the product, accessories or manual
indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be
disposed of with other household waste. To prevent
possible harm to the environment or human health
from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer
where they purchased this product, or their local
government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their supplier and check
the terms and condions of the purchase contract. This
product and its electronic accessories should not be
mixed with other commercial wastes for disposal. This
product is RoHS compliant.
When you fly
It is prohibited to use the unit in flight. Turn off the unit
before you board a plane. Using wireless Bluetooth
units inside a plane can pose risks to air safety and
interfere with telecommunicaons. It may also be
illegal.
Cleaning
• Clean the surface with a so, dry cloth.
• Do not use any sprays near the unit. Do not use any
solvents, chemicals, or cleaning soluons containing
alcohol, ammonia or abrasives.
• Do not allow liquids to spill into any openings.
Care and maintenance
Your unit is a technically advanced product and should
be treated with the greatest care. Negligence may void
the warranty.
• Do not use or keep the unit in dusty, dirty
environments. The unit’s moving parts and
electronic components can be damaged.
• Do not keep the unit in warm places. High
temperatures can reduce the lifespan for electronic
equipment, damage baeries and distort or melt
certain plascs.
• Do not keep the unit in cold places. When the unit
warms up to normal temperature, condensaon can
form on the inside which can damage the electronic
circuits.
• Do not drop the unit. Do not knock or shake it either.
If it is treated roughly the circuits and precision
mechanics can be broken.
• Do not use strong chemicals to clean the unit.
The advice above applies to the unit, baery and other
accessories. If the unit is not working as it should,
please contact the place of purchase for service. Don’t
forget the receipt or a copy of the invoice.
Bluetooth® and the Bluetooth® logo are registered
trademarks of Bluetooth SIG, Inc.
7. Further informaon
Areas with explosion risk
Always turn off the unit when you are in an area where
there is a risk of explosion. Follow all signs and
instrucons. There is a risk of explosion in places that
include areas where you are normally requested to turn
off your car engine. In these areas, sparks can cause
explosion or fire which can lead to personal injury or
even death.
Turn off the unit at filling staons, and any other place
that has fuel pumps and auto repair facilies.
Follow the restricons that apply to the use of radio
equipment near places where fuel is stored and sold,
chemical factories and places where blasng is in
progress. Areas with risk for explosion are oen – but
not always – clearly marked. This also applies to below
decks on ships; the transport or storage of chemicals;
vehicles that use liquid fuel (such as propane or
butane); areas where the air contains chemicals or
parcles, such as grain, dust or metal powder.
Li‐ion baery
This product contains a Li‐ion baery. There is a risk of
fire and burns if the baery pack is handled improperly.
WARNING
Danger of explosion if baery is incorrectly replaced. To
reduce risk of fire or burns, do not disassemble, crush,
puncture, short external contacts, expose to
temperature above 60° C (140° F), or dispose of in fire
or water. Recycle or dispose of used baeries according
to the local regulaons or reference guide supplied with
your product.
SMS and noficaons
Tap this feature to view the content.
For this, the app must have access to SMS
and noficaon messages and the app must
run in the background.
Other
Tap this funcon to access the sengs.
Call noficaon
For an incoming call:
Tap to mute the ringer.
Press and hold to reject the call.
Daily goal achieved
Set a daily goal in the app. The band will
inform you when you have reached this goal.
6. Features
The illustraons in this manual are symbolic; the
indicators on your device may differ.
Time / Date
Weather forecast
The data is synchronized by the smartphone
when the band is connected to the app.
The funcon requires access to the acvated
GPS funcon on the smartphone. The app
needs the permission for "Posion".
Pedometer
Steps / distance / calories burned
Note: The SW 320 HR does not display the
BMR (basal metabolic rate) of calories, but
only the acve calories consumed by
movements. Therefore, these values
somemes are significantly lower.
Heart rate monitor
The heart rate measurement takes place
automacally when this funcon is called up.
4. Pair the SW 320 HR to your smartphone
1. Start Bluetooth on your smartphone.
2. Open the app GetFitPro.
3. Tap Register and follow the instrucons to create an
account.
or (if you already have an account) enter your e‐mail
address and password and tap Log In.
Note! When you log in using Guest Login, your data
will be deleted if you use a different smartphone or
uninstall the app.
4. When first opened, the app scans for available
devices. Stay with the device near the smartphone.
Then tap on the name of the wristband SW 320 HR.
If automac scanning does not occur, tap Device (at
the boom of the screen) and then tap Scan Device.
5. Follow the instrucons in the app to pair your
SW 320 HR with your smartphone.
6. Make your personal sengs in the app.
Important note for charging
When charging the SW 320 HR, please make sure that
the USB plug on the device is correctly inserted into the
USB socket of the charger.
The contacts on the USB connector must be physically
connected to the contacts in the USB port of the
charger during charging.
The display will show a short charge animaon as soon
as the SW 320 HR is correctly connected to the charger.
3. Install the app to a smartphone or tablet
Download and install the app GetFitPro from Google
Play or App Store.
Compable devices
• Android version 6 and later
• iOS version 11 and later
• Bluetooth 4.0 and later compable device.
1. Wear on your wrist
Wear the wristband about one finger‐width away from
the wrist with the display facing upwards and adjust the
band so that it sits comfortably but firmly.
2. How to charge
While it’s possible that your SW 320 HR will already
come with enough charge to be powered on right out of
the box, we recommend to fully charge it before first
use.
Pull the bracelet gently to free the USB charging
connector.
Insert the USB charging connector into any USB power
adapter that permits charging.
Note! Generally charging is quicker if plugged in to a
USB power supply compared to charging via other hosts
such as computers.
Technical Specificaons
Bluetooth (MHz)
[maximum radio‐frequency power/dBm]
4.0 (2402–2480) [10]
Dimensions Diameter: 4,2 cm
Height: 1,2 cm
Display 160 x 80 pixels, 0,96“ TFT
Waterproof IP67
Weight 28 g
Baery 90 mAh Li‐ion baery
Operang ambient temperature
‐10 ~ +40 °C
EN
Changes and errors excepted.
© IVS GmbH 2020 • All rights reserved
Manual_SW_320_HR_en_v1.2
5. Operang instrucons
Tap to skip to the next funcon.
Press and hold to enter or exit the current
funcon.
The default units are “km“ and “°C“. In the app you can
switch to “Miles“ and “°F“.
SW 320 HR
Instrucons
