Bedienungsanleitung Swisstone SH 510 (Seite 1 von 2) (Englisch)

762212

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

SH 510

Instructions

Congratulaons to your new Smart home device, swisstone

SH 510. This Smart Wi-Fi window/door sensor detects and

reports opening and closing of doors and windows. Easily

installed on any door or window, the sensor triggers a signal

when parted. This lets you know when a room is entered, if

a window or a door has been le open or tampered, a push

nocaon will be reported to your smart phone.

1. Install the KAFO app

Download and install the app KAFO from Google Play or App

Store on your smartphone.

Compable devices

• Android version 4.1 and later

• iOS version 9.0 and later

• 2.4 GHz Wi-Fi network

2. Register/login on the KAFO APP

When rst opening the KAFO app, select to

a new

account or

if you already have an account.

Note! Be sure to remember the username and

password for later use with Amazon Echo or

Google Home integraon.

3. Product overview

1 21 3 4 5

1. Latch buon

2. LED

3. Reset buon

4. Tamper buon

5. Magnet

4. Placement

• Place the sensor indoors at a temperature between

-10 and +40 °C.

• The magnet has to be placed on that side of the sensor

which is marked with a small triangle. The triangles

should point each other.

• The magnet and sensor also have to be aligned/

centered thickness-wise on as similar level as possible.

• The sensor part should always be placed on the frame

to protect the electronics from heavy vibrations and

the magnet part on the door or window.

5. Mounting

1. Open the casing of the sensor by pushing the latch

buon on top of the device to remove the front.

2. Insert the 2 x AAA baeries respecng the polaries.

3. Clean the surface before mounng.

4. The sensor (a) should be mounted to the frame.

<10 mm

5. The magnet (b) should be mounted on the door/

window no further than 10 mm away from the

arrow on the sensor.

The sensor and magnet can be mounted with either:

Screws

Tape

6. Add device, Smart Setup Option

Note! Your mobile device must be connected to the same

Wi-Fi network as your SH 510 should be connected to.

Please also note that SH 510 only supports 2.4 GHz Wi-Fi

networks.

1. Mount the SH 510 according previous descripon. The

sensor must be within the Wi-Fi network range. Avoid

placing the SH 510 near potenal sources of radio signal

interference.

2. In the KAFO app, click

Add

Device

or + in the upper right

corner to add this new device.

3. Select the device type

Door/

Window Sensor

4. Make sure the light blinks

quickly, then click

Conrm

indiacor rapidly blink

. , if not

press the Latch buon and

open the case, press the Reset

buon for about 5 seconds.

5. Select the same Wi-Fi your phone is connected to

and enter the password for that Wi-Fi, then click

Home_network

********

6. When the app and the

device have found each

other, click to rename

the device to a suitable

unique name, e.g.

“Front door”.

7. When ready, click

Done

to add the found device

to the device list in the

app.

You can also click

Share to family

to share the device

with your family. Enter their KAFO account to share the

device control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Swisstone SH 510 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Swisstone SH 510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info