Children could become entangled in the cables and strangle
themselves.
ÆEnsure that the baby monitoring units and power cable are
out of reach of babies/children, i.e. they are at least one meter
away.
•Risk of explosion!
ÆOnly use the power adapter plug supplied!
ÆOnly use the battery supplied or ones of the same type!
ÆAlways treat batteries with due care and attention and only
use them as described.
ÆNever use standard and rechargeable batteries together.
Never use rechargeable batteries or standard batteries with
different capacities or charge statuses together. Never use
rechargeable batteries or standard batteries which are
damaged.
•Risk of suffocation through small objects, packaging and
protective foil!
ÆKeep children away from the product and its packaging!
CAUTION!
•Risk of fire through power adapter plugs!
Power adapter plugs can heat up.
ÆNever leave any objects on the power adapter plugs. Ensure
access to the power adapter plugs is not obstructed by fur
niture or such.
•Risk of tripping due to improperly laid cable!
ÆLay the cables so that nobody can trip over them!
•Batteries represent a hazard to health and the environment!
ÆNever open, damage or swallow batteries or allow them to
pollute the environment. They could contain toxic and
ecologically harmful heavy metals.
Intended use
The baby monitor serves to monitor a baby/child in a room. The
transmitter unit, located near the child, transmits noises made by the
baby/child to the receiver unit. Any other use is considered uninten
ded use. Unauthorised modification or reconstruction is not permit
ted. Under no circumstances open the devices or complete any
repair work yourself.
Use only in suitable environments
Observe all local directives and regulations.
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
Package contents
- Receiver unit
-
Transmitter unit
-
Power adapter plug, transmitter unit
- P
ower adapter plug, receiver unit
- Operating manual
Operating elements
Transmitter unit
1 Operating indicator
2
On/Off switch
3 Power adapter plug
socket
4 Battery compartment
Receiver unit
5 Noise indicator
6 Operating indicator
7 Volume control
8 On/Off switch
9 Power adapter plug connection
10 Belt clip
11 Battery compartment
Inserting the batteries
Æ
O
pen the battery
compartment with
an appropriate
screwdriver
.
Æ
I
nsert
the
b
atte
ries (Transmitter unit 4 x AAA, receiver
unit 3 x AAA - not provided!)
ÆClose the battery compartment.
Starting up the transmitter unit
ÆConnectthe power adapter p
lug to the power adapter socket [3]
on the transmitter unit and plug it into the mains power outlet, or
insert batteries.
Ê Theoperating indicator [1] lights up and the device is in
operation.
The transmitter unit also transmits when the receiver unit is not
in operation. The signals can be received by other units.
Switching the transmitter unit off
Starting up the receiver unit
ÆConnectthe power adapter plug to the power adapter socket [9]
on the receiver unit and plug it into the mains power outlet, or
insert batteries.
ÆSwitch on using On-Off Switch [8] to switch the unit on.ÊThe
operating indicator [6] lights up.
The range is maximally 300m but can be reduced by obstacles
such as walls etc. If the receiver unit is outside the range, the
indicator [5] flashes.
Changing the volume
ÆUse the volume control [7]to raise or lower
the volume.
Noise indicator
Thenoise indicator [5
] indicates the volume of a noise. The louder
the noise, the more LEDs are lighted.
Switching the receiver unit off
ÆSwitchthe button [8] ÊSwitch the receiver unit off.
Power adapter plugs, both units
Using the energy-efficient power adapter plugs (input 100-240V
AC
,
output 5V
DC
,
1000mA) the zero load is approx. 0.04 - 0.06W. The
average efficiency is approx. 71.94%. The maximum power
consumption is approx. 4.14W.
Service hotline
In the case of technical problems, contact our Service hotline.
Switzerland: Tel. 0900 00 1675 (national charges, Swisscom at time
of going to print: CHF 2.60/min).
In the case of claims under the terms of guarantee, please contact
your sales outlet.
Maintenance
ÆClean the surface of the housing with a soft, fluff-free cloth.
ÆDo not use any cleaning agents or solvents.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic and
electrical devices in a separate waste container. The adjacent symbol
indicates that the device must not be disposed of in normal domestic
waste!
You are legally obliged to dispose of power packs and batteries
at the point-of-sale or in the corresponding containers provided
at collection points by the public waste authorities. Disposal is
free of charge. The symbols indicate that the batteries must not
be disposed of in normal domestic waste and that they must be
brought to collection points provided by local public waste
authorities.
Packaging materials must be disposed of according to local
regulations.
Guarantee
SWITEL equipment is produced and tested according to the latest
production methods. The implementation of carefully chosen
materials and highly developed technologies ensure trouble-free
functioning and a long service life. The terms of guarantee do not
apply to the batteries or power packs used in the products. The
period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the
period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following
tampering by the purchaser or third parties. Damage caused as the
result of improper handling or operation, normal wear and tear,
incorrect positioning or storage, improper connection or installation
or Acts of God and other external influences are excluded from the
terms of guarantee. In the case of complaints, we reserve the right to
repair defective parts, replace them or replace the entire device.
Replaced parts or devices become our property. Rights to
compensation in the case of damage are excluded where there is no
evidence of intent or gross negligence by the manufacturer.
If your device shows signs of defect during the period of guarantee,
please return it to the sales outlet in which you purchased the
SWITEL device together with the purchase receipt. All claims under
the terms of guarantee in accordance with this agreement can only
be asserted at the sales outlet. No claims under the terms of
guarantee can be asserted after a period of two years from the date
of purchase and hand-over of the product.
Declaration of Conformity
This device fulfils the requirements stipulated in the EU
directive 1999/5/EC concerning radio equipment and
telecommunications terminal equipment and the mutual
recognition of their conformity. Conformity with the above mentioned
directive is confirmed by the CE mark on the device. To view the
complete Declaration of Conformity, please refer to the free download
available on our web site at www.switel.com.
Digital Baby Phone
Bambino BCC 38digital
1
2
5
4
9
10
11
Transmitter Unit
3
6
7
8
Receiver Unit
Æ
Switch on using On-Off Switch [2]
Æ
Switch off using On-Off Switch.
&KDQJLQJWKHFKDQQHO
ÆIn case there is interference or poor signal in operation,
you can try to change the channel by just pressing the
pairing button in the baby unit battery compartment. The
baby and parent unit will search an interference-free
channel to continue the operation.
Press the button inside
the hole by a pin if
there is interference.
Pairing
ÆThe units are well paired by the manufacturer. Renew the pairing
if the parent unit (receiver) loses the signal from the baby unit
(transmitter). Procedures:
ÆPress the pairing button in the battery compartment of both baby
and parent units simultaneously by a pin and hold it (refer to the
below pic).
Turn on both units. Release the pairing button after one
second. When the volume LEDs flash, the pairing is successful.
Pairing buttons
Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
Missbrauch melden von Frage und/oder Antwort
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Switel BCC38 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
