Bedienungsanleitung Switel BCC49 (Seite 28 von 32) (Deutsch, Englisch, Französisch, Italienisch)

687770

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Appendix

5 Appendix

Troubleshooting

Should problems arise with the device, please refer to the following information first. In the case of

technical problems, you can contact our hotline service, Tel. 0900 00 1675 within Switzerland (Costs

for call from Swisscom landline at time of going to print: CHF 2.60/min). In the case of claims under

the terms of guarantee, contact your sales outlet. There is a 2 year period of guarantee.

• The power LED does not light up when connecting the unit to the mains.

− Check whether there is a power failure. Check whether all connections are ok and both units

are switched on (on/off key).

• The “Link“ light on the parent unit is flashing and you cannot hear the sounds from your baby‘s

room.

− You may have moved out of range −move closer to the baby unit and wait 5 seconds for the

“Link" to establish.

− You may need to re−establish the “Link“ between the two units. Turn both units off and then:

On the baby unit: −Press the On/Off key.

On the parent unit: −Press and hold down the On/Off key for approx. 2 seconds.

The green “Link“ light comes on (this may take a few seconds).

• Can’t hear your baby on the parent unit, but the “Link“ light is still glowing steadily.

− Check the volume is turned up on the parent unit.

– You may need to turn up the sensitivity of your baby monitor.

• The power LED on the parent unit is flashing.

− The rechargeable batteries are nearly exhausted. Put the parent unit onto the charger pod.

• Your baby monitor is emitting an high pitched ear−piercing noise.

− This may happen if your parent and baby units are too close together. Move them further

apart.

Cleaning and upkeep

Clean the equipment with a dry, soft, lint−free cloth. Never use cleaning agents or solvents.

Declaration of Conformity

This device fulfils the requirements stipulated in the EU directives:

- 1999/5/EU directive on radio equipment and telecommunications

terminal equipment and the mutual recognition of their conformity.

- 2005/32/EU directive “Energy-using products“.

Conformity with the above mentioned directive is confirmed by the CE symbol on the device.

Please refer to the free download in our Website www.switel.com

for complete declaration of con-

formity.

Disposal

You are obliged to dispose of consumable goods according to legal requirements. The

adjacent symbol indicates that electrical and electronic apparatus and batteries no

longer required must be disposed of separate from domestic waste.

Electrical and electronic devices must be disposed of at suitable collection points

provided by the public waste authorities.

Batteries must be disposed of at the point of sale or at appropriate collection points

provided by the public waste authorities.

Packaging materials must be disposed of according to local regulations.

BCC 49 eco zero_GB_206x145mm_spar_DTP direkt KG 03.03.11 15:53 Seite 26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel BCC49 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info