Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF2.60/min).Inthecaseofclaimsunderthetermsofguarantee,contact
your sales outlet.
Maintenance
Cleanthesurfaceofthehousingwithasoft,uff-freecloth.Donotuseany
cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply when a device malfunction was
caused by the mobile telecommunications network operator/provider. The
terms of guarantee do not apply to the batteries or power packs used in the
products. The period of guarantee is 24 months from the date of purchase.
Alldecienciesrelatedtomaterialormanufacturingerrorswithintheperiod
of guarantee will be redressed free of charge. Rights to claims under the
terms of guarantee are annulled following tampering by the purchaser
or third parties. Damage caused as the result of improper handling or
operation, normal wear and tear, incorrect positioning or storage, improper
connectionorinstallationorActsofGodandotherexternalinuences
are excluded from the terms of guarantee. In the case of complaints, we
reserve the right to repair defective parts, replace them or replace the
entire device. Replaced parts or devices become our property. Rights
to compensation in the case of damage are excluded where there is no
evidence of intent or gross negligence by the manufacturer. If your device
does show signs of a defect within the period of guarantee, please contact
the sales outlet where you purchased the SWITEL device, producing the
purchase receipt as evidence. All claims under the terms of guarantee in
accordance with this agreement can only be asserted at the sales outlet.
No claims under the terms of guarantee can be asserted after a period of
two years from the date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre).Accordingtothelawsonthedisposalofelectronicand
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed
of in normal domestic waste and that they must be brought to collection
points provided by local public waste authorities. Packaging materials must
be disposed of according to local regulations.
Declaration of Conformity
ThisdevicefullstherequirementsstipulatedintheDirective
1999/5/EConradioequipmentandtelecommunicationsterminal
equipmentandthemutualrecognitionoftheirconformity.Conformi-
tywiththeabovementioneddirectiveisconrmedbytheCEmarkonthe
device.ToviewthecompleteDeclarationofConformity,pleaserefertothe
free download available on our web site www.switel.com.
Wireless monitor system BCF 986
OPERATING ELEMENTS
Receiver unit
1 Noise level indicator
2 Display
3 Button:changetransmitterunit
4 Button: switch receiver unit on/off
5 Menu
6 Microphone
7 Loudspeaker
8 Button: play lullaby
9 Button: raise volume, change setting, zoom 2x
10 Button: lower volume, change setting, zoom 1x
11 Operating indicator
12 Connectionqualityindicator
13 Button:talkfunction
14 Belt clip
15 Battery compartment cover
16 Power adapter socket
Transmitter unit
17 Night light
18 Light sensor
19 Camera
20 Microphone
21 Operating indicator
22 Switch: transmitter unit on/off
23 Loudspeaker
24 Power adapter socket
25 Temperature sensor
26 Antenna
27 Battery compartment cover
28 Screw for battery compartment cover
29 Button: register device
STARTING UP
The receiver unit is powered by the battery pack.
Remove the screw [14] holding the battery compartment cover [15]
using a suitable screwdriver, and remove it.
Inserting the battery pack in the receiver unit.
Closethebatterycompartmentcover.
Charging the battery pack
Connectthepoweradaptertothepowersocket[16]andaproperly
installed mains power outlet.
The transmitter unit is operated by power supplied via the power
adapterplugor4AAAbatteries(option).
Remove the screw holding [28] the battery compartment cover [27]
using a suitable screwdriver and remove it.
Insert the batteries in the battery compartment, paying attention to
correct polarity.
Replace the battery compartment cover.
Feature Value
BCF986Operatingrange:outdoor300m
WxHxD(camera) 90 x 140 x 97 mm
WxHxD(monitor) 148 x 90 x 27 mm
Weight(camera) 131,5g(excl.battery)
Weight(monitor) 217,5g(incl,battery)
Frequency 2,4 GHz
Camerasensor VGA 640 x 480
Monitordisplay 4,3“(10,9cm)ColorTFT480x272
Technical data(Allrightsreserved)
Power adaptor plug
Usingtheenergy-efcientpoweradaptormodelforcameraandmonitor
(inputAC100-240V~50-60Hz,outputDC6V/800mA)
ATTENTION!
WARNING!
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
Safety information
Risk of explosion!
Only use the power adapter plugs supplied!
Only use batteries supplied or ones of the same type!
Always treat batteries with due care and attention and only use
batteries as described.
Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged. Never charge the batteries.
Risk of suffocation through small objects, packaging and protective foil!
Keep children away from the product and its packaging!
Risks to health and the environment from batteries!
Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
Never use the units in the vicinity of medical equipment. Effects on
such equipment cannot be fully ruled out. Please observe a minimal
distance of 2.5m to sources of interference such as televisions or
computer screens.
Riskofrethroughpoweradapterplugs!Poweradapterplugscanheat
up. Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or such.
Risk of tripping due to improperly laid cable! Lay the cables so that
nobody can trip over them!
Riskoffatalinjurythroughcable!Childrencouldbecomeentangledin
the cables and strangle themselves. Ensure that the baby monitoring
units and power cables are out of reach of babies/children, i.e. they are
at least one meter away.
This device is not a complete replacement for the personal supervision
of your baby or toddler.
Preventexposuretoenvironmentalinuences,e.g.smoke,dust,
vibration, chemicals, moisture, heat and direct sunlight.
Onlyallowrepairstobecompletedbyqualiedpersonnel.
Remove the batteries during long period of non-use.
PACKAGE CONTENTS
1Camera,1Monitor,2Poweradapterplug, 1 Operating instruction
1 Battery pack for Monitor unit
Monitor
(Receiverunit)
Camera
(Transmitterunit)
LINK
13 6
2
16
1211
10
8
9
4
26 5
3
1
DC 6V
24
22
17
18
26
29
25
23
19
20
21
INTENDED USE
The baby monitor serves to monitor a baby/child in a room. The transmitter
unit, located near the child, transmits noises and images from its imme-
diate vicinity to the receiver unit. Any other use is considered unintended
use.Unauthorisedmodicationorreconstructionisnotpermitted.Underno
circumstances open the devices or complete any repair work yourself. The
devices are not intended for medical purposes. Warning and signal tones
from respiratory or heartbeat monitoring equipment are not transmitted.
Observe all local directives and regulations.
DISPLAY AND EXPLANATION OF OPERATIONS
Action to take
Result of action
[12] Reference button in the graphics
Press and hold the button
5 sec. Keep the button pressed for 5 seconds
14
15
28 27
Switching the receiver unit on/off
2 sec. button [4] Receiver unit is switched on, start screen
appears in the display.
2 sec.
button [4] Receiver unit is switched off, the display goes
out.
Switching the display on/off
Button [4]
Display is switched off, only sound is played.
Press any button Display is switched on, image and sound are
played.
The display switches on when signals are received according to the
sensitivity of the VOX function setting. When the VOX function is deacti-
vated, the display remains switched off until you press any button.
Switching the transmitter unit on/off
The transmitter unit continues to transmit even when the receiver unit is
switched off. The signals can be received by other devices.
Set switch [22] to ON Transmitter unit is switched on, operating
indicator [21] lights up red.
Registering a transmitter unit
The transmitter unit supplied is registered on the receiver unit at the facto-
ry. A maximum of 4 transmitter units can be registered on the receiver unit.
Proceed as follows to register another transmitter unit:
5 sec.
button[3] Receiver unit switches to Registration mode,
appears in the display.
Buttons [9] or [10] SelecttransmitterunitsC1toC4
Buttons[5]conrm.Theconnectionqualityindicator[12]ashesfor
10 seconds.
3sec.
button [29] pressed within 10 seconds register the
transmitter unit on the receiver unit.
If the registration process fails, Out of Range appears in the display.
Repeat the process.
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be selected
manually. Transmitter unit 1 is selected as standard.
Button[3]severaltimes Changetransmitterunits.
Individualsettingscanbedenedforeachtransmitterunit.
Scan modus
If several transmitter units are registered, you can programme the receiver
unit to switch between the transmitter units registered at 10-second
intervals. The signals from the selected transmitter units are played in
succession.
Pressbutton[3]until„Scan“appearsinthedisplay.
Button [5]
Conrmthesetting,theregisteredtransmitterunitsarein
Scan mode.
Selecting/Deselecting transmitter units for Scan mode
Pressbutton[3]untiltherequiredtransmitterunitisselected.
Buttons [9] or [10] A checkbox beside the camera icon is selected/
deselected.
If a transmitter unit is deselected, it is ignored for Scan mode.
VOX mode (sound activation)
Press button [5] until VOX or OFF appears in the display.
Buttons [9] or [10] Select one of the 5 levels of sensitivity or OFF.
Button [5] Conrmthesetting.
If the transmitter unit does not transmit an acoustic signal to the receiver
unit for a period of one minute, the receiver unit display goes out.
Talk function
Button [13] Voice communication is possible from the receiver
unit to the transmitter unit.
If you activate this function, playback of a lullaby is stopped.
Night vision function
Ifthebrightnessoftheareamonitorednolongersufcesfornormal
operation, the equipment automatically switches to night vision.
Lullabies
Button [8] appears in the display.
Selecting a lullaby
Switch between the 5 lullabies while the transmitter unit is playing a lullaby.
Buttons [9] or [10] 1 to 5 appears in the display.
You can only change the lullaby within 8 seconds. If you want to change
the lullaby at a later point, you must stop the function and then restart it.
Brightness
Press button [5] until
appears in the display.
Buttons [9] or [10] Select one of the 5 brightness levels.
Button [5] Conrmthesetting.
Setting the lower temperature limit
Thelowertemperaturelimitis15°C.
Pressbutton[5]until„Lo“appearsinthedisplay.
Buttons [9] or [10]
Set the temperature.
Button [5]
Conrmthesetting.
If you select the OFF setting, the alert function of the receiver unit regar-
ding too low a temperature is switched off.
Setting the upper temperature limit
Theuppertemperaturelimitis25°C.
Pressbutton[5]until„Hi“appearsinthedisplay.
Buttons [9] or [10]
Set the temperature.
Button [5] Conrmthesetting.
If you select the OFF setting, the alert function of the receiver unit regar-
ding too high a temperature is switched off.
Night light
The transmitter unit is equipped with an built-in night light [17]. You can
switch the night light on and off via the receiver unit.
Press button [5] until the moon icon appears in the display.
Buttons [9] or [10] Select ON or OFF.
Button [5] Conrmthesetting.
Zoom
You can switch between two zoom factors in order to enlarge or reduce the
image section monitored by the transmitter unit. If you select the double
zoom, 4 direction arrows appear in order to select one of the four image
sections.
2 sec. button [9] Select x2.
Button [5] 4 direction arrows appear in the display
Buttons [9] or [10] Select the upper or lower image section.
Buttons[8]or[3] Select the right or left image section.
Button [5] Conrmthesetting.
Proceed as follows to restore the 1st zoom factor:
2 sec. button [10] Enlarges the image section by the 1st
zoom factor.
Button [5] Conrmthesetting.