Bedienungsanleitung Switel CD 770 (Seite 118 von 124) (Deutsch, Englisch, Französisch, Italienisch)

488807

118

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

− Multiple Handsets −

118

13 Multiple Handsets

Up to five handsets can be registered on the base station. Each handset can only be registered on one base

station at any particular time. If you register the handset on a new base station, it is automatically deregistered

from the old one.

NOTE: The standardised GAP Standard enables SWITEL handsets and even those from other manufacturers

to be integrated in the telephone system. In the same way, an SWITEL handset can be registered on

base stations from other manufacturers as long as they comply with the GAP Standard.

The following options are available if two handsets are used:

S Internal calls between the handsets (intercom),

S External calls can be transferred from the handset,

S Incoming external calls are received on all handsets.

NOTE: If one handset is currently using the outside line, no further external call is possible.

GAP: Generic Access Profile = Standard for the interoperation of handsets and base stations from other

manufacturers.

13.1 Internal calls (intercom function)

As soon as several handsets are registered on a base station, they can be used for internal calls.

1. Press the I button and the internal number of the handset, e.g. I 2.

2. The call can be taken on the handset called.

NOTE: If an external call is received during an internal call, short acoustic signals are issued and the caller’s

number appears in the display, if available.

3. End the internal call by pressing the ) button.

4. Press the ( button to take an external call.

13.2 Transferring external calls to another handset

If you have taken an external call on a handset, the call can be transferred to another handset.

Press the I button and then the internal number of the required handset.

NOTE: If the handset called does not answer, take the call back by pressing the I button.

After the internal call has been taken by the handset called, the following options are available:

1. Consultation / Brokering: You can talk to the party using the other handset and then return the

external caller by pressing the I button. You can switch between the external and internal parties as

often as necessary.

2. Transfer call: By pressing the ) button on the first handset, the external call is transferred to the

handset called.

13.3 Conference calls

An external call can be transferred to another internal handset for a conference call. This enables two handset

users to confer with the external caller at the same time.

1. Establish the required connection to the external caller.

2. Press the I button and then the internal number of the required, second handset.

3. When the second, internal handset user has taken the call, press the # button for 2 seconds and all

three parties are connected in a conference call.

NOTE: During a conference call, press the I button to put the external caller on hold. Press the # button

to reactivate the conference function.

4. The conference is terminated by one of the handset users ending the call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel CD 770 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info