Bedienungsanleitung Switel CD728 (Seite 134 von 140) (Deutsch, Englisch, Französisch, Italienisch)

687910

134

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

- Multiple mobile units -

134

11 Multiple mobile units

Up to three additional mobile units can be logged on to your base station. One mobile

unit can be logged on to up to three further base stations.

When you use multiple mobile units you will have the following options:

 Internal calls between mobile units (see 11.1).

 External calls can be forwarded between mobile units (see 11.2).

 Conference calls between one external and two internal subscribers (see 11.3).

 Room monitoring (see 6.2)

 Walkie-talkie (see 6.3):

 Incoming external calls are signalled on all mobile units.

Note: If another mobile unit is already using the external line, an appropriate message

will appear in the display. In this case, it is not possible to make a further external call.

11.1 Making an internal call

When you have connected multiple mobile units to a base station, you will be able to

make internal calls. To do this, press the

INT

button and the internal number of the

required mobile unit. You can also select the required mobile unit with the cursor and

make the connection with the OK display button. The call is accepted at the mobile unit

called with the call button

and terminated on both mobile units with the

button.

Note: If an external call comes in while you are making an internal call, you will hear the

base station ringing and the caller's number will be shown in the display of the mobile

units, provided that caller display (CLIP) is available. End the internal call with the

button and accept the external call by means of the call button on one of

the mobile units.

11.2 Connecting external calls to another mobile unit

If you have accepted an external call on one mobile unit, you can forward the external

call to another mobile unit. To do this, press the

INT

button and then the number of the

required mobile unit. After the internal call has been accepted at the other mobile unit,

you have the following options:

A. Consultation: You can now speak to the internal subscriber. To return to the

external call, press the left display button twice (OPTIONS -> OUTSIDE CALL).

B. Forward the call: Press the OPTIONS display button. Select the TRANSFER

function and press the OK display button.

Note: Mobile units from other manufacturers can be integrated into the telephone

system by means of the internationally adopted GAP standard. However, all functions

that are supported by the CD728 are only available in conjunction with a CD728 mobile

unit. In the same way, you can use a CD728 mobile unit on base stations from other

manufacturers, as long as these units work using the GAP standard.

Information for using the mobile unit on other base stations:

Due to the large number of different manufacturers, it is not possible to guarantee all the

functions when using the mobile unit on another base station. It is possible that not all

the functions supported by the CD728 mobile unit will be available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel CD728 Seite 134

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info