Bedienungsanleitung Switel DC402 (Seite 83 von 100) (Deutsch, Englisch, Französisch, Italienisch)

687912

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

− Telephoning −

5.7 Calling back missed calls

The telephone stores the last ten calls in a calls list.

 or  Open and scroll through the entries stored

 Dial the number

5.8 Dialling phone numbers stored in the phone book

Phone numbers stored in the phone book (refer to Section 8.1) can be dialled quickly and

easily.

,  or  Open the phone book and select the phone book entry

 Dial the number

Phone book entries can be selected directly by opening the phone book and entering

the first letters of the entry required. Example: To access the number for Peter", for ex-

ample, press  once and use the  or  buttons, if necessary, to select the

stored entry.

5.9 Adjusting the receiver volume

The volume can be adjusted to one of five settings during a call.

 or  Press the button during the call

5.10 Muting the microphone in the handset

 Switch the function on/off

The handset microphone can be switched on and off during a telephone call. This enables you

to confer with a third party, for example, without the caller being able to hear you. The handset

loudspeaker, however, remains on; i.e. you can still hear the caller.

5.11 Talk time display

A few seconds after a call has been taken, the phone number dialled or that of the caller disap-

pears from the display and is replaced by the duration of call (hh−mm−ss).

5.12 Key lock

3 sec  Activate the key lock function

 Deactivate the key lock function

Incoming calls can be taken as normal even when the key lock function is activated (also refer

to Section 7.4). The key lock function remains active after the call has been ended.

5.13 Temporary tone dialling

If you only operate the telephone using the Pulse dialling method, you can still make use of the

advantages of the Tone dialling method (e.g.: for remote access of the answering machine).

4 sec  Switch to Tone dialling (for the duration of the call)

When the call is ended, the telephone automatically switches back to Pulse dialling.

5.14 Notes on range

The handset has a range of approx. 50 meters in closed rooms and approx. 300 meters outdoors.

In the case of a good connection to the base station, the h icon lights up continuously in the dis-

play.

If the handset is moved too far from the base station, the h icon flashes and acoustic

warning signals are issued. Move towards the base station, otherwise the call will be di-

sconnected.

If the connection to the handset has been lost, the message BASE 1" appears in the

display.

5.15 Searching for the handset (Paging)

If you have misplaced the handset, it can be located easily. Press the Paging button on the base

station; the handset rings for 30 seconds. To terminate the ringing function before the 30 seconds

has elapsed, simply press the Paging button again or the Call button on the handset.

 All the handsets registered on the base station ring.

 or  Ends paging prematurely.

5.16 Switching the handset on /off

3 sec  Switch on/off

It is not possible to switch the handset on/off if the handset is in the base station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel DC402 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info