Bedienungsanleitung Switel DC402 (Seite 92 von 100) (Deutsch, Englisch, Französisch, Italienisch)

687912

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

− Multiple Handsets −

11 Multiple Handsets

Up to five handsets can be registered on the base station. Each handset can only be registered

on one base station at any particular time.

The standardised GAP Standard enables SWITEL handsets and even those from other

manufacturers to be integrated in the telephone system. In the same way, an SWITEL

handset can be registered on base stations from other manufacturers as long as it, too,

complies with the GAP Standard.

The use of multiple handsets provides the following options:

S Internal calls between the handsets (intercom),

S External calls can be transferred between the handsets,

S Incoming external calls are received on all handsets,

S Conference calls between two handset users and one external caller.

If one of the other handsets is currently using the outside line, the  icon appears in

the display. It is not possible to make another external call.

11.1 Internal calls

As soon as more than one handset (subsequently abbreviated to: HS) has been registered on the

base station, they can be used for internal calls.

Following example: HS 1 (internal HS no. 1) calls HS 2 (internal HS no. 2).





HS 1: Connection is established to other handset

 HS 2: Takes the call

If an external call is received during an internal call, short acoustic signals are issued

and the caller’s number appears in the display, if available.

 Ends the internal call

 Takes the incoming external call

11.2 Transferring external calls internally

If you have taken an external call on a handset, the call can be transferred to another internal

handset.





HS 1: Connection is established to other handset

If the handset called does not answer, take the call back by pressing the  button.

After the internal call has been taken by the handset called, the following options are available:

11.2.1 Holding a call / Brokering

You can talk to the party using the other handset and then return the external caller by pressing

the  button. You can switch between the external and internal parties as often as necessary.

11.2.2 Transferring call

By pressing the  button on the first handset, the external call is transferred to the handset cal-

led.

11.3 Conference calls

An external call can be transferred to another internal handset for a conference call. This enables

two handset users to confer with the external caller at the same time.

 HS 1: Establish a connection to the external subscriber





HS 1: Connection is established to the other handset

 HS 2: The internal call is taken

 HS 1: Connects all calls to a joint conference

During a conference call, press the  button to put the external caller on hold. Press

the   buttons in succession to activate the conference facility again.

 HS 1 or HS 2: Press the button to end the conference call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel DC402 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info