687919

Switel DC552 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Intercom (only applicable for models with multiple handsets)
The system allows an intercom call between two handsets registered to the same
telephone base.
To initiate an intercom call:
1.Press (.
If your telephone system has only two handsets registered, the intercom call will be
automatically directed to the other system handset.
If your telephone system has more than two handsets registered, enter the handset
number you want to call by using the dial pad 1-5.
2.Press $ to answer the intercom call on the other handset.
3.To end the intercom call, press &.
NOTES:
1)The intercom call can be canceled before it is answered by pressing & or ( on
the originating handset.
2)If the handset being called does not answer within one minute, the paging will be
canceled.
To answer an incoming call during intercom
You will hear an alert tone when you receive an incoming call during intercom.
Press $ to answer the incoming call and end the intercom.
Press ( to answer the incoming call and put the intercom on hold. Press and hold
( to switch between intercom and the incoming call.
Press and hold ( to conference with both the incoming call and the intercom.
To initiate an intercom during a call
You can intercom with another system handset during a call, or invite another system
handset to join.
1.Press ( during a call.
If your telephone system has only two handsets registered, the intercom call will be
automatically directed to the other system handset.
If your telephone system has more than two handsets registered, you will need to enter
the handset number you want to intercom to by using the dial pad 1-5. The call is placed
on hold while the intercom is established with the other handset.
2.Press $ to answer the intercom on the other handset.
NOTE: The intercom call can be canceled before it is answered by pressing del/int on
the originating handset.
3.You can choose from one of the following options for this intercom call.
Press and hold ( to connect both handsets to the call.
Press ( on the originating handset to alternate between the intercom and the call.
Press & on either handset to terminate the intercom on that handset. The call will
continue on the other handset.
Push to talk (PTT) (only applicable for models with multiple handsets)
You can directly broadcast messages to the speakerphone of any registered handset in
the system. If your telephone system has more than two handsets:
1.Press +/- to select the handset you want to broadcast the message to, or
select ALL HANDSET to broadcast to all handsets and then press %.
2.PRESS AND HOLD [PTT] TO TALK shows on the screen when the connection is set
between the initiating handset and the destination handset.
3.Press and hold the ? button on either handset to start the broadcast.
NOTE: Connection set between handsets lasts for 30 minutes after it is established, or
30 minutes after the last broadcast. You will need to perform the above operation again if
you want to initiate a PTT to another system handset or after the 30-minute time out.
Phonebook
Add a phonebook record
1.%.
2.+/-: PHONEBOOK -> %.
3.% -> ADD NEW.
4.Enter the name (max. 14 character). Press the key to the corresponding character to
display the correct letter. See the character table for more information.
5.%.
6.Enter the number (max. 20 digits). If you need a pause between digits, press and hold
the # until a P appears in the display. This will insert a 3-second pause in the dialing
sequence.
7.%.
NOTES:
1.The phonebook is shared by all handsets. Changes made to the phonebook on any
one handset apply to all.
2.The directory can store up to 100 entries with up to 20 digits for each telephone
number and 14 characters for each name.
Character table
Use the dial pad and the chart below to enter a name (up to 14 characters). Each press
of a particular key displays the character in the following order:
Dial pad key Character by number of key presses
1 2 3 4 5 6
1 space 1 _ < > ?
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0 - / ||| # +
NOTE: Press ( to correct an error.
To view/call a phonebook record
Records are stored alphabetically in the phone book. To search the phonebook:
1.).
NOTE: You can also access the phonebook by pressing % and selecting
PHONEBOOK.
2.+/-.
3.$ to call the displayed entry.
To search a phonebook entry alphabetically
1.).
2.Press +/- to scroll to any entry.
3.Press the dial pad key (0-9) that corresponds to the first letter of the entry you are
looking for. The closest match in alphabetical order will appear. You can then press
+/- to view the next entry.
4.% to view the phone number.
-OR-
$ to call the displayed entry.
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the
phonebook while you are on a call. This feature is useful if you wish to access another
numbers (such as bank account information or access code) from the phonebook.
To access a number in the phonebook while on a call:
1.).
2.+/- to locate the desired entry.
3.$ to dial the number.
Edit a phonebook entry
1.).
2.+/-: locate a desired entry -> %.
3.+/-: EDIT CONTACT -> % twice.
4.Edit the name by using the del/int key to erase and backspace, then enter new
characters using the dial pad keys and press %.
5.Edit the number by using the del/int key to erase and backspace, then enter new
numbers using the dial pad keys and press %.
Delete a phonebook entry
1.).
2.+/-: locate the desired entry -> %.
3.+/-: DELETE ENTRY.
4.% 3 times to confirm.
Delete all phonebook entries
1.)
2.+/-: select any entry -> %
2.+/-: DELETE ALL.
3.% twice to confirm.
Caller ID
Using Caller ID service
IMPORTANT: To use the Caller-ID capabilities of this telephone system, you must
subscribe to Caller-ID services from your service provider. Check with your telephone
service provider for details. Your telephone stores caller ID memory for the 40 most
recent calls. Each entry holds up to 20 digits for the telephone number and 14 characters
for the name.
Review/callfrom the call log
As calls are received and stored, the display is updated to let you know new calls have
been received. To scroll through the caller ID records:
1.+.
2.- to view from the most recent calls, or + to view the oldest calls.
3.When the desired record is displayed, press $ to call.
Save a number to the phonebook
1.+.
2.+/-: locate the desired record -> %.
3.%: COPY TO PHBK.
4.Enter the name by using the dial pad keys if necessary -> %.
5.Edit the number by using the dial pad keys if necessary -> %.
Delete caller ID record
1.+.
2.+/-: locate the desired record -> %.
3.+/-: DELETE to delete the selected record -> % twice.
-OR-
+/-: DELETE ALL to delete all records -> % twice.
Troubleshooting guide
If your telephone system is not operating properly, first try this general reset procedures:
1.Unplug all power adapters from the power outlets.
2.Disconnect the telephone line cord from the base or modular jack.
3.Remove the battery compartment covers and unplug all handset battery packs.
4.After a few minutes, re-install all handset battery packs, making sure that the
connectors are snug and the wires are not pinched before replacing all battery
compartment covers.
5.Plug the power adapters for the base and any chargers back into their power outlets.
Be sure not to use outlets that are controlled by wall switches or timers.
6.Place all handsets in the telephone base or chargers to charge without interruption for
at least 30 minutes before use.
7.Plug the line cord into the telephone base or modular jack and verify operation.
General Product Care
Avoid dropping the handset, as well as other rough treatment to the phone. Clean the
phone only with a dry soft cloth. Never use cleaning agents, paint thinner, abrasive
powder, alcohol, or other chemical products to clean the unit. Doing so will damage the
unit. Retain the original packaging in case you need to ship the phone at a later date.
Important Safety Instructions
Some of the following information may not apply to your particular product; however,
when using telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
1.Read and understand all instructions.
2.Follow all warnings and instructions marked on the product.
3.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4.Telephones should not be used while you are in a bathtub, shower or pool. Immersion
of the telephone or handset in water could cause an electrical shock.
5.Slots and openings in the cabinet back or bottom are provided for ventilation, to protect
it from overheating. Do not block or cover these openings. Do not block the openings by
placing the product on a bed, sofa, rug, or other similar surface. Do not place this product
in a built-in installation unless proper ventilation is provided.
6.Only operate this product from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your dealer or local
power company.
7.Plug the adapter into an easily accessible electrical outlet near the equipment.
8.Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
9.Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
10. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock.
11. Never spill liquid of any kind on the product.
12.To reduce the risk of electric shock, do not disassemble this product. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
13. Do not expose the product to extreme temperatures such as areas near a hot
radiator, stove or in a hot car. Do not place product upon other consumer electronic
products such as; computer monitors, power amplifiers, etc.
14. Do not place lighted candles, cigarettes, cigars, etc., on or near the telephone.
15. Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
16. Never install or modify telephone wiring during a lightning storm.
17. Never install jacks or telephones in wet locations.
18. Use caution when installing or modifying telephone lines to prevent electrical shock
and/or fire.
19. Under the following conditions, unplug this product from the wall outlet and refer
servicing to qualified service personnel:
A.The power supply cord or plug is damaged or frayed.
B.The product has been exposed to rain or water.
C.The product does not operate normally by following the operating instructions.
D.The product’s cabinet has been damaged.
E.The product exhibits a distinct change in performance.
20. Avoid using a telephone during an electrical-storm. There may be a remote risk of
electric shock from lightning.
21. Do not use the telephone to report a gas leak in the vicinity of the leak.
22. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
23. Only use attachments/accessories specified by the manufacturer.
24. Unplug this apparatus during lightning storms or when unused for long periods of
time.
IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL
PRECAUTIONS SHOULD BE OBSERVED:
1.Use only the type and size battery(ies) specified in the user’s manual.
2.Do not use this product if the battery door is removed or missing.
3.Replace batteries that appear to be swollen or have damaged wiring.
4.Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for
possible special disposal instructions.
5.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
6.Exercise care in handling battery(ies) in order not to short out the battery(ies) with
conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor
may overheat and cause burns.
7.Do not attempt to recharge the battery(ies) provided with or identified for use with this
product that are not rechargeable. The battery(ies) may leak corrosive electrolyte or
explode.
8.Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this
product by heating them. Sudden release of the battery(ies) electrolyte may occur
causing burns or irritation to eyes or skin.
9.When replacing battery(ies), all batteries should be replaced at the same time. Mixing
fresh and discharged batteries could increase internal cell pressure and rupture the
discharged battery(ies). (Applies to products employing more than one separately
replaceable primary battery.)
10. When inserting battery(ies) into this product, the proper polarity or direction must be
observed. Reverse insertion of battery(ies) may result in leakage or explosion.
11. When inserting battery(ies) into this product, do not twist or pinch the wires or allow
wires to become pinched in battery door.
12. If storing over 30 days, remove battery(ies) from this product because the battery(ies)
could leak and damage the product.
13. Discard “dead” battery(ies) as soon as possible since “dead” batteries are more likely
to leak in a product.
14. Do not store this product, or the battery(ies) provided with or identified for use with
this product, in high-temperature areas. Batteries that are stored in a freezer or
refrigerator for the purpose of extending shelf life should be protected from condensation
during storage and defrosting. Batteries should be stabilized at room temperature prior to
use after cold storage.
15. If your product uses rechargeable battery(ies), charge the battery(ies) only in
accordance with the instructions and limitation specified in the user’s guide.
16. Battery safety precautions
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic
materials could be released which might cause injury to persons or property damage.
To reduce the risk of fire or personal injury, use only the supplied battery or replacement
battery.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
Use only the supplied rechargeable battery or replacement battery.
In Case of Problems
Service Hotline
Should problems arise with the telephone, please refer to the following information first.
In the case of technical problems, you can contact our hotline service, Tel. 0900 00 1675
within Switzerland (Swisscom fees at time of going to print: CHF 2.60/min). In the case of
claims under the terms of guarantee, please contact your sales outlet. There is a 2 year
period of guarantee.
Problems and solutions
Problems Solutions
No connection to base
station possible
- Check that the handset has been registered on the base
station with the correct PIN code.
The system no longer
responds
- Reset all the functions to their default settings.
- Disconnect the power adapter plug briefly from the power
socket.
No telephone calls
possible
- The telephone is not connected properly or is defective.
Only use the telephone connection cable supplied.
- Test whether the telephone connection is in order by
using another telephone.
- The power adaptor plug is not plugged in or there is a
complete power failure.
- The rechargeable batteries are empty or defective.
- The handset is too far from the base station.
- The wrong dialling mode is set.
Connection is disturbed
or cut off
- The handset is too far from the base station.
- The base station is in an unsuitable location.
The batteries are empty
within a short time
- The batteries are empty or defective.
- Place the handset in the base station properly. Clean the
contact surfaces on the handset and base station with a
soft, dry cloth.
- Place the handset in the base station for 16 hours.
The caller number dis-
play (CLIP) does not
function
- The caller number display (CLIP) is a supplementary
service offered by your telephone network provider. Con-
tact your network provider for further information.
- The caller has suppressed the transmission of their
phone number.
Declaration of Conformity
This device fulfils the requirements stipulated in the EU directive: 1999/5/EC
directive on radio equipment and telecommunications terminal equipment and
the mutual recognition of their conformity. Conformity with the above mentioned
directive is confirmed by the CE mark on the device.To view the complete
Declaration of Conformity, please refer to the free download available on our
web site at www.switel.com.
Guarantee
SWITEL equipment is produced and tested according to the latest production methods.
The implementation of carefully chosen materials and highly developed technologies
ensure trouble-free functioning and a long service life. The terms of guarantee do not
apply where the cause of equipment malfunction is the fault of the telephone network
operator or any interposed private branch extension system. The terms of guarantee do
not apply to the batteries or power packs used in the products. The period of guarantee
is 24 months from the date of purchase.All deficiencies related to material or
manufacturing errors within the period of guarantee will be redressed free of charge.
Rights to claims under the terms of guarantee are annulled following tampering by the
purchaser or third parties. Damage caused as the result of improper handling or
operation, normal wear and tear, incorrect positioning or storage, improper connection or
installation or Acts of God and other external influences are excluded from the terms of
guarantee. In the case of complaints, we reserve the right to repair defect parts, replace
them or replace the entire device. Replaced parts or devices become our property.
Rights to compensation in the case of damage are excluded where there is no evidence
of intent or gross negligence by the manufacturer.If your device does show signs of a
defect within the period of guarantee, please contact the sales outlet where you
purchased the SWITEL device, producing the purchase receipt as evidence. All claims
under the terms of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted after a period
of two years from the date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection point provided by your
local public waste authorities (e.g. recycling centre). According to laws on the
disposal of electronic and electrical devices, owners are obliged to dispose of
old electronic and electricaldevices in a separate waste container. The
symbol indicates that the device must not be disposed of in normal domestic
waste!
Batteries represent a hazard to health and the environment!
Never open, damage or swallow batteries or allow them to pollute the
environment. They may contain toxic, ecologically hazardous heavy metals. You
are legally obliged to dispose of power packs and batteries at the point of sale
or in the corresponding containers at collection points provided by local public
waste authorities. Disposal is free of charge. The symbols indicate that the
batteries must not be disposed of in normal domestic waste and that they must
be brought to collection points provided by local public waste authorities.
Packaging materials must be disposed of according to local regulations.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Switel DC552 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Switel DC552

Switel DC552 Bedienungsanleitung - Deutsch - 2 seiten

Switel DC552 Bedienungsanleitung - Französisch - 2 seiten

Switel DC552 Bedienungsanleitung - Italienisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info