Bedienungsanleitung Switel dct4072 duo comfort (Seite 102 von 112) (Deutsch, Englisch, Französisch, Italienisch)

300043

102

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

− Multiple Handsets −

102

ë Enter the number of the base station (1 to 4) and confirm

the input

If the handset is already connected to a base station, the corresponding number flas-

hes.

A search is then made for the base station.

When the base station is found, proceed as follows:

ë Enter the PIN (default setting: 0000) and confirm the input

{í}

The handset is then registered.

The handset is assigned an internal call number. The handset already registered has

the internal call number 1. The second handset registered is assigned the internal call

number 2. The internal call number appears in the right of the display when in Standby

mode.

11.4.2 Registering DECT−GAP handsets from other manufacturers

In order to register a DECT−GAP handset from another manufacturer, follow the instructions in the

operating manual provided by the original manufacturer and then press the Paging button 

on your base station for 3 seconds. Use the PIN to register (default setting: 0000).

11.4.3 Deregistering handsets

A handset can only be deregistered by another handset still registered. It is not possible to com-

plete the deregistration using the handset which is to be deregistered.

zz Open the SETUP menu.

yz Select the DEL HANDSET menu and confirm.

ë Enter the PIN (default setting: 0000) and confirm the input

{í}

Press the C button to cancel the process.

ë Enter the internal call number of the handset to be

deregistered and confirm the input. {í}

11.5 Additional base stations

The range of the handset can be increased by using several base stations. To implement the func-

tion, all the base stations must be connected to a telephone line connection. Depending on the

intended use, each base station can be assigned the same telephone number or each can be as-

signed a different call number. Pay attention that all the base stations overlap with regard to their

range.

The handset must be registered on each base station.

Please test the range of the handset before starting up a new base station. If a handset is registe-

red on the base station and the automatic base station dialling function has been activated on the

handset (refer to Section 7.5), the handset is always automatically transferred to the next base

station.

11.5.1 Selecting a base station

y Open the REGISTER menu

yz Select the SELECT BASE function and confirm

All the base stations to which the handset is already registered appear in the display.

The number of the base station currently active flashes.

ë Enter the internal number of the base station to which the

handset should switch and confirm the input. {í}

Or:

AUTO

 This option causes the handset to switch to the next base

station automatically when the connection to the current

base station is interrupted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel dct4072 duo comfort Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info