Bedienungsanleitung Switel DE102 (Seite 78 von 100) (Deutsch, Englisch, Französisch, Italienisch)

688170

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

− Starting Up −

2 Starting Up

2.1 Safety information

Caution: It is essential to read the Safety Information in Chapter 1 before starting up.

2.2 Checking the contents of the package

The package contains:

a base station with power adapter plug

a telephone connection cable

two handsets four rechargeable batteries

a charging station with power adapter plug an operating manual

2.3 Connecting the base station

Connect the base station as illustrated in the dia-

gram. For reasons of safety, only use the power

adapter plug and telephone connection cable sup-

plied. The power adapter plug from the base station

must always be connected to a properly installed

230 V mains power outlet.

2.4 Connecting the charging station

Connect the charging station as illustrated in the dia-

gram. For reasons of safety, only use the power

adapter plug supplied.

2.5 Inserting the batteries

Insert two batteries of the type AAA Ni−MH 1.2 V 550 mAh in the bat-

tery compartment after opening it. Pay attention to correct polarity

(refer to Fig.). Close the battery compartment cover.

Important: Do not use any other type of batteries.

2.6 Charging the batteries

When preparing to use the handset for the first time, place it in the base station (display facing up-

wards) for at least 14 hours. The charging control lamp on the base station lights up. The handset

warms up during the charging process. This is normal and does not represent a risk. Do not

charge the handset with charging units from other manufacturers. Failure to charge the batteries

properly can lead to telephone malfunction.

The current battery charge status is indicated in the display:

Full Half empty Low Empty

2.7 Tone or Pulse dialling mode

The telephone can be connected to both analogue connections (pulse dialling) and digital con-

nections (tone dialling). The equipment is set to Tone dialling mode at the factory. If the telephone

does not work on your telephone connection, refer to Chapter 7.3 to learn how to switch the tele-

phone to analogue, pulse dialling mode.

2.8 Operating on private branch exchanges

If your telephone is connected to a private branch exchange, use the R button to implement

the transfer calls or automatic callback functions. When used on a private branch exchange, a Re-

call time of 90 ms must be set. The sales outlet where you purchased the telephone can tell you

whether it will work on your private branch exchange.

2.9 Supplementary services from your telephone network provider

The SWITEL telephone supports all major supplementary services offered by the telephone net-

work provider (e.g. brokering, call waiting, three−way conferencing, etc.). Press the R button

to use these services. Please contact the telephone network provider with regard to enabling the

supplementary services.

TAE−F

230 V

50 Hz

230 V

50 Hz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel DE102 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info