Bedienungsanleitung Switel DE104 (Seite 81 von 100) (Deutsch, Englisch, Französisch, Italienisch)

688181

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

− Telephoning −

5 Telephoning

The way in which the telephone is operated is subsequently described by means of text and sym-

bols: If a button is depicted, it means that the respective button must be pressed.

In addition, the following symbols appear:

 Enter digits or letters

2 sec  Press the button depicted for 2 seconds

 Acoustic signal on the handset

 Acoustic signal on the base station

40

Text or icon in the display

The ringing signals on the handset  and base station  only function when they

have not been deactivated beforehand!

5.1 Taking a call

 and ,  Take the call

 End the call

When the handset is ringing, press the  or  button to adjust the

ringing volume.

If the ringing tone has been deactivated on the handset, incoming calls are only indica-

ted by the base station (as long as the base ringer has not been deactivated).

5.2 Taking two calls

You will hear acoustic signals (call waiting) if a second call is received while you are talking on the

telephone. The number of the second caller appears in the display. Press the buttons below in

the sequence described to switch between the two callers, the connection to the other caller is

put on hold.

,  Switch to other caller

Caution: The functions for phone number display, holding calls and call waiting are

supplementary services offered by your telephone network provider. Contact your net-

work provider for further information.

5.3 Making a call

 Enter the phone number (max. 32 digits)

 Dial the phone number

If you enter a wrong digit:

 Press briefly: Deletes the last entry

2 sec  Press longer: Deletes the entire phone number

It is also possible to press the Call button  first to obtain the dialling tone for an outside line.

Then enter the required telephone number. It is not possible to correct wrong digits individually

using this dialling procedure.

5.4 Dialling pause

In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0")

in order to obtain the dialling tone for an outside line. When using some older private branch ex-

changes, it takes a little time before the dialling tone becomes audible. Particularly in the case of

such private branch exchanges, it is useful to insert an automatic pause after the number for the

outside line so that the number can be dialled in a continuous process without having to wait for

the dialling tone.

Between pressing the number for an outside line and the phone number required, press the 

button once. P" appears in the display. After dialling the number for the outside line, the telephone

then waits 3 seconds before dialling the actual phone number.

The pause can also be entered with the phone number in the phone book.

5.5 Redialling

The telephone stores the last ten numbers dialled in a redialling list.

 Open the redialling list (the last phone number

dialled appears in the display)

 or ,  Select an entry and dial the number

If a phone number has been stored in the phone book, the name associated with it ap-

pears in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel DE104 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info