Bedienungsanleitung Switel DET3373 (Seite 31 von 36) (Deutsch, Englisch, Französisch, Italienisch)

688301

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Registering a handset

☞ Five handsets can be registered to a base station. The handsets deli-

vered with your telephone are already registered. To register a “foreign“

handset please refer to it’s user manual.

First of all disconnect the base station from the mains and re-connect

it. After this the base station will be in registration mode for 3 minutes.

… press and hold for approx.

3 seconds until and flash.

… press and hold for approx.

3 seconds.

Enter a number for the base station (1 … 5) to subscribe to.

Enter the PIN for the base station (default setting for DE 337x base

station “0 0 0 0“).

If the handset is registered the display will show HS and the handset’s

internal telephone number.

Deleting a handset

☞ You can delete a handset from a base to allow another handset to be

registered. Note: you can only remove other handset in your system but

you are not able to remove the handset you are using.

… press and hold for approx.

3 seconds.

… press and hold

or approx.

3 seconds.

Enter the PIN for the base station (default setting for DE 337x base

station “0 0 0 0“).

Enter the internal telephone number (1…5) of the handset you want to

remove.

The handset will go back to standby is the removal is successfully.

Ringtone melody (handset)

… press and hold for approx.

3 seconds. The current melody sounds.

… select the desired melody.

Press to confirm the setting.

Ringtone volume (handset)

… press briefly. The handset will ring in the current volume.

… select the desired volume. When the volume is “0“ (ringer off),

appears in the display.

Press to confirm the setting.

Setting the flash time

☞ You can set the flash time to 100 ms (usually for special services of

your telephone provider/delivery state) or 300 ms (e. g. for a telephone

exchange). In case of questions please contact your telephone provider or

the system administator of your PBX.

… press and hold for approx.

3 seconds. S (100 ms) or L (300 ms)

appears in the display. For switching the flash time press and hold

again for approx. 3 seconds.

Setting the dial mode (tone / pulse)

☞ You can switch the dial mode. In most situations the TONE option

should be selected.

… press and hold for approx.

3 seconds. t (tone) or P (pulse) appears

in the display. For switching the dial mode press and hold again

for approx. 3 seconds.

6 Answering Machine

The answering machine is operated via the base station.

Switching the answering machine on/off

… press. The answering machine is switched on.

… press again. The answering machine is switched off.

Setting the answering machine language

The language used by the answering machine can be set to one of the fol-

lowing languages: German, English, French.

… press and hold for approx. 10 seconds to set the required language.

An acoustic confirmation signal is issued and the language abbreviati-

on appears in the base station display.

Answering mode

You can select between “answer with message recording" and “answer

only" modes.

☞ The answering machine is provided with pre−recorded outgoing

messages at the factory. These outgoing messages are played if you do

not record your own outgoing messages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel DET3373 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info