Bedienungsanleitung Sygonix SY-3561086 (Seite 60 von 64) (Deutsch, Englisch, Holländisch, Französisch)

707205

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

Allrights includingtranslationreserved. Reproductionby anymethod,e.g. photocopy,microlming, or thecapture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Start-up

Please consult the manufacturer‘s English instruction manual. The operating inst-

ructions are available on the CD provided.

a) Positioning

• Select a suitable installation site. This location should be a place where the digital recorder is

protected from unauthorised access.

• Protect the digital recorder from direct sunlight and heat. The cooling of the digital recorder

and the installed hard drive takes place via air convection. Never cover the digital recorder,

and do not place any other devices or objects on it.

If the digital recorder is for instance installed in a cabinet, a suitable cooling system is requi-

red in order to avoid heat accumulation.

• Keep in mind that the digital recorder must not be exposed to vibrations or agitations, other-

wise the hard drive will be damaged. All previous recordings will be lost.

b) Connection

• Connect the BNC video inputs to your surveillance cameras. The digital recorder is particu-

larly suitable for AHD cameras.

• BNC, VGA or HDMI video outputs are available to connect your surveillance monitor. The

desired monitor resolution can be adjusted in the setup menu at a later stage.

• Connect the USB mouse enclosed to one of the USB ports.

• Connect the digital recorder with the circular low-voltage plug of the power adapter provided.

Plug the mains adapter into a mains socket. The digital recorder will then carry out a self-test

(approx. 10 seconds) and is ready for use after that.

Do not move the digital recorder with the installed hard drive when the latter is in

operation. Movement during operation may cause the write/read heads in the hard

drive to make contact with the magnetic disk. This may not only lead to data loss but

may also damage the hard drive!

The same applies to the 30-second period, the time needed for the magnetic disks

in the hard drive to come to a full stop after the adapter has been disconnected from

the power supply.

c) Accessing the setup menu, entering the password

You must log in as the administrator for all settings to be available when you enter the setup

menu to set the functions.

If you click once using the right mouse button, a menu will appear on the screen. Clicking “Main

Menu“ using the left mouse button will open an input window.

Username: admin

Password: 123456

d) Formatting the hard disk

On initial start-up you must format the installed hard drive using the digital recorder‘s setting

menu. This will result in the loss of all data stored on the hard drive.

Without formatting the hard drive, you won‘t be able to record video footage from the connected

surveillance cameras.

e) Note for 64bit Windows Operating Systems

If you are using a 64bit operating system, install the CMS2000 software (ignore error messa-

ges).InthesoftwaredirectoryonyourPCyouwillthenndtheprograms„vcredist_x86.exe“

and „vcredist_x86_C.exe“. Run those. After that you can use the CMS2000 software on the

64bit operating system.

Maintenance and Cleaning

The product is maintenance-free.

Before cleaning the product, disconnect it from the power supply (unplug the mains plug).

Then, wait for at least 30 seconds until the magnetic disks in the hard drive have come to a

complete stop.

Use a clean, dry, soft cloth for cleaning. Do not use aggressive cleaning agents, as these can

cause discolouration. To prevent scratch marks, do not press too strongly on the surface when

cleaning.

Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner.

Disposal

Electronic devices are recyclable material and do not belong in the household was-

te. Dispose of an unserviceable product in accordance with the relevant statutory

regulations.

Technical Data

a) Digital recorder

Suitable hard drive (internal) ........ SATA, 8.89 cm/3.5“ max. 8TB

Compatible hard drive (external) .. USB2.0

Compatible cameras ..................... AHD, CVI, TVI, 720p, 960p, 1080p, 4. 0MP

Video output ................................. BNC, VGA, HDMI

Network connection ...................... LAN, 10/100MBit

USB ports ..................................... 3 (USB2.0, USB1.1 compatible)

Attention: The front USB port and rear bottom USB port cannot be used simultaneously due

to the parallel design.

Ambient conditions ....................... Temperature -10 °C to +55 °C, air humidity 10% to 90%

relative, non-condensing

Dimensions (W x H x D) ............... 253 x 230 x 45 mm

Weight .......................................... 810 g (without hard drive)

b) AC adapter

Operating voltage ......................... 100 - 240 V/AC, 50/60 Hz

Output ........................................... 12 V/DC, 2 A

Sygonix SY-3561086 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info