Bedienungsanleitung Sylvania 3819LC (Seite 12 von 45) (Englisch)

11615

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

You must use the remote control

for the this procedure.

NOTE:

Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select

the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the

channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1 Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a

standard AC outlet.

2 Turn on the TV/VCR

Press the POWER button to turn on the

TV/VCR.

3 Select "ENGLISH" or "ESPAÑOL"

Select "ENGLISH" or

"ESPAÑOL"=Spanish using the

F.FWD/B or REW/s button.

"[ ]" indicate the selected lan-

guage.

4 Begin auto preset

Press the PLAY/▲ or STOP/▼

button to point to "AUTO

PRESET".

Then press the F.FWD/B button.

The tuner scans and memorizes all active channels in

your area.

NOTES:

●

The TV/VCR distinguishes between standard TV

channels and cable channels.

●

If you want to play or record a video tape BEFORE

presetting the tuner, you must press the MENU

button. To preset the tuner again, see "CHANNEL

SET UP AGAIN" on page 13.

5 After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you can

select the desired channel directly with the remote

control number buttons or CHANNEL K or L.

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can

be deleted from the memory. (Of course, you can add

the deleted channel into the memory again.)

1 Select "CHANNEL SET UP"

Press the MENU button.

Press the PLAY/▲ or STOP/▼

button to point to "CHANNEL

SET UP".

Then, press the F.FWD/B button.

2 Select "ADD/DELETE CH"

Press the PLAY/▲ or STOP/▼

button to point to "ADD/

DELETE CH".

Press the F.FWD/B button.

3 Enter the desired channel number

Press the PLAY/▲ or STOP/▼

button until your desired channel

number appears. (You can also

use the number buttons or the

CHANNEL ▲/▼ button to enter

it) (Example: CH8)

4 Delete (or add) it from (into) memory

Press the F.FWD/B or REW/s button. The channel

number changes to light red. The channel is deleted from

memory.

●

To delete another channel, repeat steps [3] and [4].

●

If you press the F.FWD/B or REW/s button again,

the channel is memorized again.

Added channel: Light blue.

Deleted channel: Light red.

5 Exit the channel setup mode

Press the MENU button to returns to TV mode.

NOTE:

To confirm that channel(s) has been deleted or

added, press the CHANNEL ▲ or ▼ button.

– SET UP –

LANGUAGE

[ENGLISH] ESPAÑOL

AUTO PRESET

– SET UP –

LANGUAGE

[ENGLISH] ESPAÑOL

AUTO PRESET

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

– CHANNEL SET UP –

ADD / DELETE CH (TV)

AUTO PRESET

ADD/DELETE

7L01

B5900-02

- 12 - EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 3819LC Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info