11615
15
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
MANUAL CLOCK SETTING
Make sure ...
Use the remote control for this procedure.
TV/VCR power must be turned on.
In the example below, the clock is to be set to:
DATE March 1st, 1998
SETTING TIME 5:40PM
1 Select "SETTING CLOCK"
Press the MENU button.
Press the PLAY/ or STOP/
button to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2 Select "MANUAL CLOCK SET"
Press the PLAY/ or STOP/
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD/B button.
3 Select the month
Press the PLAY/ or STOP/
button until your desired month
appears.
(Example: March 03)
Then, press the F.FWD/B button.
4 Select the day
Press the PLAY/ or STOP/
button until your desired day
appears. (Example: 1st 01)
Then, press the F.FWD/B button.
5 Select the year
Press the PLAY/ or STOP/
button until your desired year
appears. (Example: 1998)
Then, press the F.FWD/B button.
6 Select the hour
Press the PLAY/ or STOP/
button until your desired hour
appears. (Example: 5, PM)
Then, press the F.FWD/B button.
7 Select the minute
Press the PLAY/ or STOP/
button until the desired minute
appears. (Example: 40)
8 Start the clock
Press the MENU button.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU
button. Use this feature to
synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 30 seconds, you may have to reset
the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD/B or REW/s button.
3) Enter correct numbers using the PLAY/ or
STOP/ button.
4) Press the MENU button to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your
cable system, select "AUTO CLOCK" and press the
F.FWD/B or REW/s button to turn [OFF] this func-
tion. Then you can manually adjust the clock.
– M E N U
TIMER PROGRAMMING
PICTURE CONTROL
B
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– MANUAL CLOCK SET
MONTH DAY YEAR
0 3 / – – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET
MONTH DAY YEAR
0 3 / 0 1 – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET
MONTH DAY YEAR
0 3 / 0 1 SUN 1 9 9 8
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 3 / 0 1 SUN 1 9 9 8
HOUR MINUTE
0 5 : PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 3 / 0 1 SUN 1 9 9 8
HOUR MINUTE
0 5 : 4 0 PM
5 : 40 PM
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH [AUTO]
B
MANUAL CLOCK SET
D.S.T. [OFF]
7L01
B5900-02
- 15 - EN
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sylvania 3819LC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info