Bedienungsanleitung Sylvania 3819LC (Seite 19 von 45) (Englisch)

11615

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

PLAYBACK

NORMAL PLAYBACK

Make sure ...

●

TV/VCR power must be turned on.

1 Insert a prerecorded tape

If the erase-protection tab has been removed, the

TV/VCR will start playback automatically.

2 To begin playback

Press the PLAY button.

3 To stop playback

Press the STOP button when

playback is completed.

TRACKING ADJUSTMENT

●

Tracking adjustment will be set automatically

(Digital Tracking function) when you start playback.

●

However when playing pre-recorded tapes or tapes

recorded on units other than your own, noise lines

(black and white streaks) may appear on the playback

picture. If this occurs, you can adjust the tracking

control manually by pressing the CHANNEL

▲

▼

button until the streaks disappear. To return to the

DTR function, stop the tape once and start playback

again.

PICTURE SEARCH

This feature is very useful in finding or skipping over a

particular scene on a tape. In this mode, the sound will

be muted.

1) You may view a video tape at a high speed in either

a forward or reverse direction by pressing the F.FWD

or REW button. (in the SP / LP / SLP modes)

2) Press it again and the TV/VCR will now search in

super high speed. (in the LP / SLP modes only)

NOTE:

Tapes recorded in the SP or LP mode will

display a noise bar on the TV screen and the picture

may revert to Black and White. This is normal.

3) Press the PLAY button to return to normal speed.

STILL PICTURE

You can view a still picture on the TV screen during

playback (the Still mode). Press the PAUSE/STILL

button during playback. Only tapes recorded in the SLP

mode will show the least amount of lines.

Press the PLAY button to return to playback.

NOTES:

●

Usually there will be video "noise" lines (black and

white streaks or dots) on the screen. This is normal.

If the tape was originally recorded in SP or LP mode,

the still picture will be black and white in addition to

the "noise" lines.

This is not a fault of the machine, but merely a

by-product of the technology involved in

producing a TV/VCR with 2 video heads.

●

If it is left in the Pause mode for more than five

minutes, the TV/VCR will automatically switch to

the Stop mode.

NOISE CANCEL

(in the Still mode)

This feature allows you to reposition or reduce the noise

lines of a still picture.

Press the PAUSE/STILL button so that the noise lines

change position on the screen so you can see the picture

in its entirety without distracting noise lines.

NOTE:

This feature can be activated ONLY when

viewing a tape recorded in the SLP mode. If the tape was

originally recorded in the SP or LP mode, the still picture

may revert to black and white in addition to the "noise

bars". This is normal.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to

vibrate vertically, stabilize the picture by pressing the

CHANNEL K or L button.

NOTE:

If there are video noise lines on the screen, reposition or

reduce them. Refer to "NOISE CANCEL".

PLAY

STOP

7L26

B7916-03

- 19 - EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 3819LC Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info