Bedienungsanleitung Sylvania 6221CVB (Seite 11 von 14) (Englisch)

11657

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

TIMER RECORDING

You may set the VCR to start recording while you are

away. You can set seven programs to record on specific

days, daily or weekly within a 1 year period.

1) Insert a tape with its safety tab into the VCR.

2) Select main menu by pressing the MENU button.

3) Select "TIMER PROGRAMMING" by pressing the

PLAY or STOP button. Then, press the F.FWD button.

●

If you have not yet set the clock, "CLOCK SET" ap-

pears. If so, follow the steps [3] and [4] in "CLOCK

SET UP " section. Then, set the timer recording.

4) Set the timer.

●

To go back one step, press the REW button.

5) To set another program, repeat step [4]. To exit, press

the RESET/EXIT button.

6) Press the POWER button to set the timer. The TIMER

indicator on the VCR comes on.

HINTS FOR TIMER

RECORDING

●

If there is a power failure or the VCR is unplugged

for more than 30 seconds, the clock setting and all

timer settings will be lost.

●

If the tape runs out before the end time, the VCR will

switch to the Stop mode immediately, eject the tape

and the VCR power will be turned off. The TIMER

indicator will flash.

●

If a tape is not in the VCR or does not have the safety

tab, the TIMER indicator flashes and timer recording

cannot be performed. Please insert a recordable tape.

TO STOP AN AUTOMATIC TIMER

PROGRAM ALREADY STARTED

Press the STOP/EJECT button

on the VCR

TO CHECK, CORRECT, OR CANCEL AN

AUTOMATIC TIMER PROGRAM

1) Turn the power on.

2) Select main menu by pressing the MENU button.

3) Select "TIMER PROGRAMMING" by pressing the

PLAY or STOP button. Then, press the F.FWD but-

ton.

4) Select the program number which you want to

check by pressing the PLAY or STOP button. The

details of the selected program appears on the TV

screen.

●

Go to the digit you want to change by pressing the

F.FWD or REW button. Then, enter correct num-

bers by pressing the PLAY or STOP button.

●

You may cancel the entire program by pressing the

REW button during the program number flashes.

5) Press the RESET/EXIT button to exit.

6) Press the POWER button to return to timer stand-

by mode.

AVOIDING OVERLAPPING PROGRAMS

There may be times when a program will not record.

When programs overlap:

●

The program with the earliest start time has priority.

●

Once the earliest program finishes, the overlapping

program with the lower number will begin recording

in sequence.

●

The illustration below demonstrates the sequence of

recordings.

Select once, daily or weekly recording

Set the start time

Then, press the

F.FWD

button.

Set the end time

Set the channel number

Set the tape speed

Press the

PLAY or STOP

button repeatedly

for the desired channel number.

Press the

PLAY or STOP

button repeatedly

for the desired tape speed.

Set the program number (1~7)

Program number which is not set up flashes.

Press the PLAY or STOP button repeatedly

for the desired program number.

Then, press the F.FWD

button.

Set the date

First, press the

PLAY or STOP

button

for the month,

then, press the

F.FWD

button.

Next, press the

PLAY or STOP

button

for the day.

First, press the

PLAY or STOP

button

for the hour,

then, press the

F.FWD

button.

Next, press the

PLAY or STOP

button

for the minute,

then, press the

F.FWD

button.

And then, press the

PLAY or STOP

button

for AM or PM.

Follow the instructions of "Set the start time"

to set the end time.

ONE TIME PROGRAM

PROGRAM NUMBER 4

DATE 05/03 THU

START TIME 07:30 PM

END TIME 08:30 PM

CHANNEL 16

REC SPEED SP

SLP

PROGRAM NUMBER 4

ONCE

DAILY

WEEKLY

PROGRAM NUMBER 4

DATE - - / - -

START TIME - - : - - - -

END TIME - - : - - - -

CHANNEL - -

REC SPEED - -

Then, press the

F.FWD

button.

Then, press the

F.FWD

button.

Then, press the

F.FWD

button.

If you connected the VCR to a cable box or satellite box as in

"Basic connections" on page 6, select the VCR to channel 3

or 4 the same channel as the CH3 or CH4 switch on the back

of the VCR. Then, select the channel you want to record at

the cable box or satellite box. Leave the cable box or satellite

box on for timer recording.

For once: Press the

PLAY or STOP

button

to point to "ONCE".

For weekly: Press the

PLAY or STOP

button

to point to "WEEKLY".

For daily (Monday~Friday):

Press the

PLAY or STOP

button

to point to "DAILY".

Then, press the

F.FWD

button.



9:00AM 10:00AM 12:00PM

Program 1

(10:00AM-11:00AM)

Program 2

(9:00AM-10:00AM)

Program 3

(9:30AM-12:00PM)

11:00AM

Recording Sequence

*Recording period is SHADED

0J01

H7741

- 11 - EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 6221CVB Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info