Bedienungsanleitung Sylvania 6260VC1 (Seite 4 von 8) (Englisch)

11691

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

– 4 –

SETUP

PLAYBACK

FUNCTION

Set the clock accurately for proper automatic timer

recording. We suggest that you use a TV or radio

station as your time source.

1 Select main menu by pressing [MENU].

(If the clock is not set, the CLOCK SET menu

appears first. In this case, follow step [3].)

2 Select "CLOCK SET" by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

3 Set the clock.

CLOCK SET

MONTH DAY YEAR

03 / 18 MON 2002

HOUR MINUTE AM/PM

05 : 40 PM AM

Press [PLAY] or [STOP]repeatedly.

Then, press [F.FWD].

Press [PLAY] or [STOP] repeatedly.

Then, press [F.FWD].

The day of the week will appear automatically.

Press [PLAY] or [STOP] repeatedly.

Then, press [F.FWD].

Press [PLAY] or [STOP] repeatedly.

Then, press [F.FWD].

Press [PLAY] or [STOP]

repeatedly.

Press [PLAY] or [STOP] repeatedly.

Then, press [F.FWD].

Set the month

Set the day

Set the year

Set the hour

Set the minute

Set the AM

or PM

CLOCK SET UP

Insert the prerecorded tape. The

VCR will turn on. If the safety tab has

been removed, the VCR will start

playback automatically.

Turn on the TV and set the TV to channel 3 or 4.

Now set the CH3/CH4 switch on the back of the

VCR to match the channel selected on the TV.

Begin playback by pressing [PLAY].

• Tracking adjustment will be set automatically (Digital

Tracking function) when you start playback. To adjust

the tracking manually, press [CHANNEL ] on

the VCR.

• When a tape has reached the end, the VCR will

rewind the tape to the beginning, eject the tape, and

turn off the VCR automatically.

• S-VHS Quasi Playback (SQPB): This unit allows you

to view a tape recorded in S-VHS format. (Noise

lines may appear on the picture.)

4 To stop playback, press [STOP].

(

)

• To go back one step, press [REW].

4 Start the clock by pressing [EXIT/RESET] or

[F.FWD].

STILL/SLOW

You can freeze the picture on TV screen by pressing

[PAUSE/STILL] during playback.

• You can advance the picture by one frame at a time

by pressing [PAUSE/STILL] during the still mode.

• If the picture begins to vibrate vertically during the still

mode, stabilize the picture by pressing

[CHANNEL ].

• If the picture is distorted or rolling vertically, adjust the

vertical hold control on your TV, if equipped.

You can see the slow motion by pressing [SLOW]

during playback or the still mode.

• If the noise bar appears on the TV screen, you can

reduce it by pressing [CHANNEL ].

• After the VCR has been in Still/Slow mode for 5

minutes, it will stop automatically to protect the tape

and the video head from damage.

• To return playback, press [PLAY].

(

)

(

)

This feature allows you to play a tape over and over.

1 Select main menu by pressing [MENU].

2 Select "AUTO REPEAT" by pressing [PLAY] or

[STOP].

3 Begin auto repeat playback by pressing [F.FWD] so

that [ON] appears next to "AUTO REPEAT".

• If the on-screen menu still remains, press

[EXIT/RESET] to exit the menu.

• To cancel the Auto repeat mode, press [F.FWD] at

step [3] so that [OFF] appears next to "AUTO

REPEAT".

• When you set the Auto repeat mode to [ON] while the

Counter memory mode is ON, the VCR will exit the

Counter memory mode automatically.

PICTURE SEARCH

If you want to skip or repeat a scene during playback,

press [F.FWD] or [REW].

• Press it again and the VCR will now search in super

high speed. (in the LP/SLP modes only)

AUTO REPEAT PLAYBACK

SEARCH FUNCTIONS

1 Press [MENU] until the main menu appears.

2 Select "CHANNEL SET UP" by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

3 Select "AUTO SET UP" by pressing [PLAY] or

[STOP]. Then, press [F.FWD]. After scanning, the

tuner stops on the lowest memorized channel.

O PRESET THE CHANNEL AGAIN

O CHANGE THE ON-SCREEN LANGUAGE

PLAYBACK FUNCTION

NORMAL PLAYBACK

When the VCR automatically program the tuner to scan

only the channels you receive in your area, some

channels may be skipped due to weak signal. You can

manually add the channel in the VCR memory.

1 Press [MENU] until the main menu

appears.

2 Select "CHANNEL SET UP" by

pressing [PLAY] or [STOP]. Then,

press [F.FWD].

3 Select "MANUAL SET UP" by

pressing [PLAY] or [STOP]. Then,

press [F.FWD].

4 Enter the desired channel number by pressing

[PLAY] or [STOP].

5 Add or Delete it from memory by pressing [F.FWD]

or [REW] so that "ADD" or "DELETE" flashes on the

TV screen accordingly.

6 Exit the Preset mode by pressing [EXIT/RESET].

TO ADD/DELETE CHANNELS

- MENU -

TIMER PROGRAMMING

AUTO REPEAT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

[OFF]

[ON]

1 Press [MENU] until the main menu appears.

2 Select "LANGUAGE SELECT" by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

3 Select "ENGLISH" or "ESPAÑOL" by pressing [PLAY]

or [STOP]. Then, press [EXIT/RESET].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 6260VC1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info