Bedienungsanleitung Sylvania 6513DG (Seite 9 von 36) (Englisch)

11877

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

VOLUME 20

C C C C C C C C C C C C C C C C

AUX

1 Press [POWER] to turn on the unit.

NOTES:

If the TV screen shows snow

noise and there is no operation

for more than 10 seconds,

“HELPFUL HINTS” appears.

• Make sure if the antenna or cable is connected

properly. (Refer to “ANTENNA/CABLE CONNEC-

TIONS on page 6.)

• Set the“AUTO CH PROGRAMMING” in the

CHANNEL SET UP. (Refer to “CHANNEL SET UP”

on page 11.)

• If those setting do not work properly, please

call our help line on the front page of this owner’s

manual.

2 Use [CH.

] or the Number buttons to

select your desired channel number.

3 Use [VOL.

] to adjust the volume.

Press

[MUTE] to instantly

mute the sound. Press it again

to restore the previous sound

level.

NOTE:

•Even if you turn off the unit in the DVD mode, the unit

will be in the TV mode when you turn it on again.

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite

box, use

[CH. K / L] to select CH3 or CH4 accord-

ing to the output channel setting of the device and

select desired channel on that device.

TO WATCH EXTERNAL INPUT

When an external equipment is

connected to the front AUDIO/

VIDEO input jacks, press

[SELECT] or [CH. K / L] repeat-

edly until "AUX" appears on the

screen.

- HELPFUL HINTS -

1.PLEASE CHECK TO SEE IF

THE ANTENNA/CABLE/

SATELLITE IS

PROPERLY CONNECTED.

2.DID YOU PERFORM

“AUTO CH PROGRAMMING”?

3.PLEASE REFER TO FRONT

PAGE OF THE OWNER’S

MANUAL OR REAR PANEL

FOR SUPPORT LINE

INFORMATION.

INITIAL SET UP

When you turn on the power for the first time,

the INITIAL LANGUAGE screen is displayed.

Select the language for screen display and perform

auto programming of the channels.

1 After antenna or cable connection is

completed, connect the power cord into

a standard AC outlet.

2 Press [POWER] to turn on the unit.

3 Press one of the keys listed

below to select the language

of on-screen menu.

• ENGLISH:

[VOL.

]

• ESPAÑOL: [VOL.

]

• FRANÇAIS: [CH.

]

4 Confirm the antenna (or cable)

connection and press

[PLAY

• The tuner scans and

memorizes all active

channels in your area.

5 When the scanning is completed,

the tuner stops on the lowest

memorized channel.

NOTES:

•You can exit the INITIAL SETUP menu by pressing

[SET-UP]. If the button is pressed during channel

scanning, the tuner stops scanning and the lowest

memorized channel is displayed.

•

The INITIAL SETUP menu is displayed every time

you turn on the unit unless the scanning is com-

pleted.

• In case no channel can be

received by the channel scanning,

"NO TV SIGNALS" is displayed on

the screen. Turn off the unit and

check the antenna connection,

then follow steps 1 to 5 again.

•

You can change the setting after completing INI-

TIAL SETUP by LANGUAGE menu or CHANNEL

SET UP menu. (Refer to "ON-SCREEN MENU LAN-

GUAGE" or "CHANNEL SET UP" on page 11).

CH 15

V OPERATION AND SETTINGS

TV SECTION

WATCHING A TV PROGRAM

TV OPERATION AND SETTINGS

TV SECTION

To use the number buttons

•Single digit channels: (Ex. 02, 03, 04 and so on)

Press [0] first to select a single digit channel.

•Two digit channels: (Ex. 12, 38, 95 ...)

Press two digits directly.

•Tree digit channels: (Ex. 115, 125 ...)

Press

[+100] first, then press the last two digits.

SELECT LANGUAGE

ENGLISH

NEXT:PRESS VOL

ESPAÑOL

DESPUÉS:PRESIONE VOL

FRANÇAIS

APRÈS:PRESSEZ CH.

– INITIAL SETUP –

PLEASE CONNECT ANTENNA

OR CABLE OR SATELLITE

TO THIS UNIT.

THEN PRESS PLAY,

IN ORDER TO PERFORM

“AUTO CH PROGRAMMING”

NO TV SIGNALS

(Example)

T8200UA(EN).QX3 06.2.6 0:02 PM Page 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 6513DG Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info