11925
12
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
EN - 12 -
AUTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Press [SETUP] then press [
K
] or [
L
] to point
to “CHANNEL SET UP”.
2 Press [ENTER] then press [
K
] or [
L
] to point
to “AUTO PRESET CH”.
3 Press [ENTER].
The tuner scans and memorizes all the active
channels in your area.
The tuner stops on the lowest memorized channel.
When “AUTO PRESET CH” is activated
where there is no TV signal input, “NO TV
SIGNALwill appear on the display after the
completion of channel scanning.
The unit may recognize CATV channels to be
TV channels if reception condition is poor. In
this case, check the antenna connection and try
“AUTO PRESET CH” again when reception
conditions are better.
Auto channel programming is NOT necessary
when connected to a cable box or satellite
box. Just select the channel for cable box or
satellite input (ex. CH3 or CH4) on the unit,
then select your desired channel on the cable
box or satellite box.
ADDING/DELETING CHANNELS
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
1 Press [SETUP] then press [
K
] or [
L
] to point
to “CHANNEL SET UP”.
2 Press [ENTER] then press [
K
] or [
L
] to point
to “ADD/DELETE CH”.
3 Press [ENTER] then press the Number but-
tons or [CH.
KK
/
LL
] to select the desired
channel number.
4 Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
To delete another channel, repeat steps 3 to 4.
If you press [ENTER] again, the channel is
memorized again.
5 Press [SETUP] to exit the menu.
To confirm that channel(s) has(have) been
deleted or added, press [CH. K / L].
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO PRESET CH
- TV SET UP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
SETUP
ENTER
ENTER
123
456
789
0 +10
+100
ENTER
SETUP
SETUP
- TV SET UP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
ENTER
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO PRESET CH
ENTER
CHANNEL SET UP
NOTE
Added channel : Light blue
Deleted channel : Light red
NOTE
15
ADD/DELETE
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sylvania 6620LDT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info