Bedienungsanleitung Sylvania 6719DDS (Seite 34 von 56) (Englisch)

11953

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

- 34 - EN

1C29

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the RECORDING

indicator goes off.

2)Press the SETUP button on the remote control.

3)Confirm “TIMER PROGRAMMING” is pointed.

4)Press the ENTER button. The details of programs

appear on the TV screen.

5)Press the SETUP button on the remote control to

return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

•

Make sure the channel you want to record is prop-

erly set in advance.

•

It is not necessary to press the RECORD button for

timer recording.

•

Recording begins automatically at the Start time.

•

The display will not be turned on when the programmed

recording begins. To watch the currently recorded TV

program or to play a DVD disc, press the POWER but-

ton to turn on the display and use the SELECT button to

choose the TV/VCR mode or the DVD mode.

•

The erase-prevention tab on the cassette must be in

place (or you must put tape over the hole).

•

If the erase-prevention tab is removed, the cassette will

be ejected when the POWER button is pressed to off.

•

If the tape runs out before the end time, the

TV/DVD/VCR will switch to the Stop mode

immediately, and the tape will be ejected.

TV/VCR

AUTO RETURN

With this feature, after timer recording is finished,

the beginning of the recorded program(s) can be

searched for automatically.

1 Select “USER’S SET UP”

Press the SETUP button on the

remote control.

Press the Arrow button

K or L to

point to “USER’S SET UP”.

Then, press the ENTER button.

2 Set “AUTO RETURN” to [ON]

Press the Arrow button K or L to

point to “AUTO RETURN”.

Press the ENTER button until [ON]

appears.

TV/VCR

3 Auto Return will begin

When all the timer recordings are completed, the

TV/DVD/VCR will rewind to the beginning of the

recorded program(s).

NOTE:

•

If you press the POWER button while tape is

rewinding, the Auto Return will stop.

4 Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using the

ENTER button.

If there is a power failure of any kind, the

TV/VCR/DVD will retain its memory for this fea-

ture.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

–

USER’S SET UP

–

RENTAL [OFF]

REPEAT PLAY [OFF]

B AUTO RETURN [ON]

VCR AUDIO [HIFI]

TV AUDIO [STEREO]

SLEEP TIMER

The Sleep Timer function turns off the

TV/DVD/VCR without using the POWER button

after a desired period of time.

NOTE:

•

This function does not operate during Recording

mode.

TV/VCR

1 Select “SLEEP TIMER”

Press the SLEEP button on the remote control until

“SLEEP TIMER” appears.

2 Set sleep time

Press the SLEEP button until your

desired sleep time appears.

Each additional push will increase

the time by 30 minutes up to 120

minutes.

After 5 seconds, exit the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the SLEEP button on the remote control until

“SLEEP TIMER” appears. Press the SLEEP button

until “SLEEP 0 MINUTES” appears.

SLEEP 120 MINUTES

TD858UJ(P01-35).QX33 03.9.3 5:23 PM Page 34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 6719DDS Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info