Bedienungsanleitung Sylvania 6724DG (Seite 28 von 44) (Englisch)

11973

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

You can determine the playing order of tracks.

In the stop mode, press [MODE].

• The PROGRAM screen appears.

2 Use [

] to select a track,

then press

[ENTER].

NOTES:

• Up to 99 tracks can be entered.

• Press

[CLEAR] to erase the

most recently entered track.

• If you enter more than 8 tracks, you can change pages

of the program list with

[H / G].

•To erase all tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

4 Press [PLAY

] to play the programmed tracks.

This function shuffles the playing order of

tracks.

1 In the stop mode, press

[MODE] twice.

• The RANDOM screen appears.

2 Press [PLAY

] to start random playback.

NOTE:

• REPEAT setting is available during random playback.

(Refer to "REPEAT TRACK" on page 27.)

3 Press [STOP

] to stop random playback.

PLAY

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

- - no indication - -

RANDOM

PROGRAMMED PLAYBACK

RANDOM PLAYBACK

You can check the information about the current disc by pressing [DISPLAY].

For DVD-Videos

1 Press [DISPLAY] during playback to show cur-

rent Chapter.

• The elapsed and remaining

playing time of the current

chapter will be displayed.

2 Press [DISPLAY] again to show current Title.

• The elapsed and remaining

playing time of the current title

will be displayed.

Press [DISPLAY] again.

• The bit rate and the current

repeat setting will be displayed.

• If you are playing a dual layered disc, the layer

number will also be displayed.

(L0: Layer 0 is playing. L1: Layer 1 is playing).

Press [DISPLAY] again to exit.

9/49 0:00:00 -0:03:30

1/3 0:00:00 - 1:23:45

TL1

For Audio CDs

1 Press [DISPLAY] during playback to show the

current Track.

• The elapsed and remaining

playing time of the current

track will be displayed.

2 Press [DISPLAY] again to show current Total

Track.

• The elapsed and remaining

playing time of the total track

will be displayed.

3 Press [DISPLAY] again to exit.

4/12 0:03:21 - 0:02:15

4/12 0:13:45 - 0:45:40

PROGRAM B

When in the PROGRAM

mode or RANDOM

mode.

PROGRAM

TOTAL 0:14:25

1/1

1/4

6 1:30

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40 1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

3 5:00

10 1:30

12 2:45

6 1:30

7 2:30

PROGRAM

TOTAL 0:00:00

1/1

1/4

1 3:40

CD-DA

ENTER

CLEAR

PLAY

2 4:30

1 3:40

3 5:00

4 3:10

5 5:10

6 1:30

7 2:30

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

5 Press [STOP

] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY

Press

[STOP

] twice to cancel the pro-

grammed playback.

NOTE:

• REPEAT setting is available during programmed

playback. (Refer to "REPEAT TRACK" on page 27.)

N-SCREEN INFORMATION

T2200UA_EN.QX4 06.2.13 3:44 PM Page 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sylvania 6724DG Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info