9
Engine start control switch
The switch button position is under seat.
“ON” position: Engine is locked and can not be started
engine in this position.
“OFF” position: When the ignition switch is “on” position,
the start control switch is “off” position, press
electrical starter button while holding the front
or rear brake lever will start the engine.
Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the “ON” position, and slide the turn signal switch to left or right . Then, the
turn signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left-side turn signal light flashing means you intend to make a left turn.
Right-side turn signal light flashing means you intend to make a right turn.
§STORAGE BOX§
This box is located under the saddle.
Maximum load capacity:10kg.
Do not store valuables in the box.
Make sure that the saddle has been locked completely
after it was pressed down.
Take out valuables before washing to avoid wetting these
objects.
Do not place thermal sensitive objects in the box
because of engine’s heat and high temperature.
§SAFETY HELMET HOOK§
Stop the scooter, and hook the safety helmet
chin belt the hook.
§FUEL TANK CAP§
1.Insert the key into the seat lock and open the seat, and turn the fuel cap anticlockwise, then the
cap can be removed.
2. Do not fill above the fuel upper limit when refueling.
3. Align the “△”mark on the cap with the “△”mark on the fuel tank, then turn the fuel cap
clockwise and lock the seat.
