Bedienungsanleitung Sym Orbit 50 (Seite 4 von 24) (Englisch)

482058

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

3.BEFORE RIDING

4.SAFE RIDING

3.BEFORE RIDING

This manual describes the correct usage of this motorcycle including safety riding, simple inspection

methods and so on.

For a more comfortable and safety riding, please read this manual carefully.

For your benefit, please ask your SANYANG dealer the operating manual and carefully read the

following:

y Correct use of the motorcycle.

y Pre-delivery inspection and maintenance.

Thank you very much for your patronage

In order to maximize your motorcycle’s performance, a periodical inspection and maintenance

should be completely carried out.

We recommend that after riding your new motorcycle for the first 300 kilometers, you should take

your motorcycle to the original dealer for an initial inspection, and to have your motorcycle

inspected periodically every 1000 kilometers thereafter.

y In case the motorcycle’s specifications and construction are modified and different from the photos

and diagrams on the owner’s manual / catalogues, the specifications and construction of the actual

motorcycle shall prevail.

4. SAFE RIDING

It is very important to be relax and clothe properly when driving, observe traffic regulations, do not rush,

always drive carefully and relaxed.

Usually, most people would ride their newly bought motorcycle very carefully, but after they became familiar

with their motorcycles, they tended to become reckless which may result in an accident.



To remind you:

y Please wear a safety helmet, and properly tighten the chin belt when riding a motorcycle.

y Clothes with open or loose cuffs may be blown by wind and cause the cuffs to get caught on the

steering handle and thus affects riding safety.

y So, put on clothes with tight sleeves.

y Hold the steering handle by both hands when riding. Never ride with only one hand.

y Observe the speed limit.

y Wear suitable low-heel shoes.

y Perform periodical maintenance and inspection in accordance with the schedule.

WARNING!!

y To avoid getting burned by exhaust pipe when taking a passenger. Make sure your passenger has

put his/her feet on the pedals.

After running, the exhaust pipe is very hot, be careful not to get burned when conducting an

inspection or maintenance.

After running, the exhaust pipe is very hot, select a suitable location to park your motorcycle to avoid

others getting burned by the exhaust pipe.

CAUTION:

Modified motorcycle will affect its structure or performance, and cause poor engine operation or

exhaust noise, which will result in shortening the motorcycle’s service life.

Besides, modification is illegal and does not conform to the original design and specifications.

A modified motorcycle will not be covered by warranty, therefore, do not modify your motorcycle at

will.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sym Orbit 50 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sym Orbit 50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info