Bedienungsanleitung Synq CDX-2 (Seite 7 von 46) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

468129

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

ENGLISH USER MANUAL

SYNQ® 9/87 CDX-2

RELAY FUNCTION:

First open the 2 faders of the CD inputs on your mixer. Press the RELAY button to

enable the relay function, the relay LED turns on. Put a disc in both players and start

playback on one of the units. Alternately a track will be played from both units until the

relay function is disengaged. You can always put a new CD in the player that is waiting

in pause. In this way you can create an endless program, perfect for use in pubs etc.

NOTE: by switching on the relay function you automatically put both players in single mode.

 PITCH BENDING:

This function is used to put the beats of two tracks in perfect “synq” (). This can be

done in two ways:

 PITCH BEND buttons: The speed increases or decreases respectively as long as

the PITCH BEND+ or PITCH BEND- button is pressed.

 JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of

the music by turning the JOG WHEEL clockwise to speed up or counterclockwise to

slowdown. The rotation speed the JOG WHEEL determines the percent of pitch bend.

 CD-TEXT:

Not only MP3 files can show the track name on the display. Some normal audio CDs use

CD-TEXT to show the track names. Also some CDR burning software (ex. Nero) can

add CD-TEXT to a normal audio CD. When the CDX-2 detects these CD-TEXT data, the

display will show them automatically. When no CD-TEXT is available the display shows

“no CD-TEXT”.

 PLAYING MP3 FILES:

The CD player automatically detects if a CD contains MP3 files. The CDX-2 is able to

read several different MP3 formats. The display shows some of the ID3-tags (song title /

performer / folder name / bitrate). The CD may contain up to 999 MP3- files, spread over

maximum 255 folders.

The MP3-files may have the following file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3

Check the technical specifications to see which MP3-files are allowed.

 PLAYING/RECORDING CD-R and CD-RW:

Apart from normal audio CD’s the CDX-2 can play both CD-R (CD recordable) and CD-

RW (CD rewriteable). Please note that you should always use the “disc at once” and

“track at once” disc writing options! Although the CDX-2 is capable of reading CD-R and

CD-RW recorded at higher speeds, we suggest not using recording speeds more than

x12 to increase readability. Always buy good quality brands for CD-R and CD-RW!

If the disc is multi session, it will only play the first session:

 if the first session is CD-DA you can only play CD-DA tracks.

 if the first session is MP3 you can only play MP3 files.

ABOUT LOOPS:

 CREATE AN AUTO LOOP:

Make sure the automatic beat counter is active and its readout is stable. Press the

AUTOLOOP button at the right moment. The CDX-2 automatically calculates the

endpoint of the loop and starts playing the 4Beat loop instantly.

NOTE: This function only workswell when the music contains continuous and steady beats.

ENGLISH USER MANUAL

SYNQ® 10/87 CDX-2

 CREATE A LOOP:

While a track is playing, press R.CUE/LOOP IN button to program the starting point of

the loop. Now press the OUT/EXIT button to program the endpoint of the loop. The

seamless loop starts playing at once. (With some practice you will be able to create

perfect loops!) While the loop is playing, you can press the OUT/EXIT button again to

exit the loop and continue the rest of the track.

It is possible to program a new loop, even when the current loop is still playing. While the

loop is playing, simply press the R.CUE/LOOP IN button to set the starting point of the

new loop. Now enter the endpoint by pressing the OUT/EXIT button. Your new loop is

programmed and playing.

 RESTART A LOOP:

This can be done in 3 ways:

 When a loop is programmed and you left it by pressing the OUT/EXIT button, just

press RELOOP to restart the loop.

 When a loop is programmed and you left it by pressing the OUT/EXIT button, just

press OUT/EXIT again to restart the loop. The point where you pressed OUT/EXIT is

now programmed as the new endpoint of the loop.

 When the loop is still playing, press the RELOOP button to restart the loop

immediately. You can repeat this several times to create a “Stutter” effect.

 EDIT A LOOP:

When a loop is programmed, press the RELOOP/STUTTER button for about 2 seconds

to enter “loop edit” mode. While the loop is seamlessly playing, the alphanumerical

display shows the time information of the loop endpoint. Use the jog wheel to set the new

loop endpoint. To make things very easy you can hear your modifications to the loop

endpoint continuously. When the loop is perfect, press the LOOP OUT button to save the

new loop endpoint.

 CUT/EXTEND LOOP FUNCTION:

When a loop is playing you can press the AUTO LOOP button to start the “cut/extend

function”, the display shows “1/1 Loop” (original loop).

 CUT FUNCTION: turn the jog dial one click in counterclockwise direction to cut the

loop in half (display shows “1/2 Loop”). With every extra click in counterclockwise

direction the loop is cut in half until you reach “1/256 Loop”. You will notice a “*”

character on the left side of the display appearing and disappearing. This is a visual

aid that tells you when it is safe to cut the loop in half without a “false” skip in the

loop: when it is safe to cut the loop, the “*” appears. When the “*” is not visible, you

will risk a false skip in the loop while cutting.

 EXTEND FUNCTION: turn the jog dial one click in clockwise direction to double the

loop length by 2 (display shows “2/1 Loop”). With every extra click in clockwise

direction the loop is doubled until you reach “32/1 Loop”. You will notice a “*”

character on the left side of the display appearing and disappearing. This is a visual

aid that tells you when it is safe to turn the extend function off or to cut the loop in half

without a “false” skip in the loop: when it is safe to stop the extend function or to cut

the loop, the “*” appears. When the “*” is not visible, you will risk a false skip in the

loop while cutting.

Synq CDX-2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info