Bedienungsanleitung Tamaha RP-U200 (Seite 50 von 57) (Englisch)

98206

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

E-12

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Make the following settings on your computer after the installation of the driver is finished.

Setting of Audio and Audio CD

[Windows 98/98SE only]

* Terminate all the activated applications.

* When using Windows 98SE, restart Windows, first.

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

Double-click the “Multimedia” icon.

Click the “Audio” tab and select “USB Audio

Device” at “Preferred device” of “Playback”.

* Usually, this setting is automatically made.

* If “USB Audio Device” does not appear, restart

Windows.

Click the “CD Music” tab and select the CD-ROM

drive for playing audio CDs.

Click the check box of “Enable digital CD audio for

this CD-ROM device” to enter the check mark.

* It may happen that the check box cannot be clicked

because some CD-ROM drives cannot be used for

playing audio CDs.

Click “OK” and close the “Multimedia” setting

panel.

Restart Windows.

Note

When using two or more drives, you must make the above setting

for each drive.

Checking the Audio setting

[Windows Me only]

Click the Windows Me “Start” button and select

“Settings”, and then “Control Panel”.

Double-click the “Sounds and Multimedia” icon.

Click the “Audio” tab and select “USB Audio

Device” at “Preferred device” of “Sound

Playback”.

* Usually, this setting is automatically made.

* If “USB Audio Device” does not appear, restart

Windows.

Checking sound output and adjusting volume

[Windows 98/98SE and Windows Me]

Make the following operations on the front panel of

this unit.

a) Press the power switch to turn on this unit.

(Some messages are shown on the display.)

b)Press the PC input selector key repeatedly to

select USB as the input source.

c) Use the volume control to adjust the volume.

(Set the control to about “30”.)

Adjust the volume on the computer as follows.

a) Double-click the speaker icon on the task tray,

or select “Start”, “Programs”, “Accessories”,

“Entertainment” in this order and click “Volume

Control”.

(The volume adjustment window appears.)

b)Adjust the volume by dragging the “Volume”

slider. Set the slider between the center and

max. positions.

* Do not enter the check mark in the “Mute” check

box. If entered, sound output will stop.

Click the Windows “Start” button and select

“Settings”, and then “Control Panel”.

Double-click the “Sounds” (or “Sounds and

Multimedia”) icon.

Click the “Sounds” tab.

Check that the sound is output normally by

outputting “Default sound”, etc. from “Events” (or

“Sound Events”).

* If no sound is heard, restart Windows and check again.

AUX1

AUX2

TUNER

DSP P-SET

VOL

VIRTUAL

5.I

DIGITAL

PROLOGIC FMAM ST

USB PCM D.

DSP

Display

Volume control

Power switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tamaha RP-U200 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tamaha RP-U200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info