Bedienungsanleitung Tangent MCS-600 (Seite 17 von 20) (Englisch)

68099

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

USING THE RADIO

RDS is a method for the transmission of additional information

from Radio Stations. It is only available in FM mode. For

example, the name of the radio station, the name of the

program or the type of program can be shown on the display.

It functions only when the broadcasting station has the RDS

transmission and the signal is strong enough.

Press “DISPLAY” on remote control to display the RDS

information. RDS contains the following informations:

PS (Program Service name)

PTY (Program TYpe)

CT (Clock Time)

RT (Radio Text)

Press the DISPLAY button on the remote until PS appears.

The current stations name will be shown.

NO PS will be shown if the signal from the radio

station is not strong enough or no such service is available.

A) PS (Program Service Name)

Note:

RDS (Radio Data System)

This receiver is equipped with a back-up memory. This

function ensures that radio preset, and sound adjustments will

be preserved if you experience power failures or you

disconnect the receiver from the power socket. The back-up

memory will preserve the radio presets and sound

adjustments for approximately one week/7 days.

If the power is disconnected for more than one week, the radio

presets and sound adjustments will be erased.

Back-up memory

B) PTY (Program Type)

Note:

C) CT (Clock - Time)

Note:

D) RT (Radiotext)

Note:

PTY SEARCH (Program Type Search)

Press the DISPLAY button on the remote until PTY

appears. The current type of the program will be shown.

NO PTY will be shown if the signal from the radio

station is not strong enough or no such service is available.

Press the DISPLAY button on the remote until WAITING CT

will appear. The current time from the radio Station will be

shown, e.g. 15:30

1. The Clock - Time will be only transmitted from the radio

stations once a minute, so you need to wait for less

than 1 minute to see the time.

2. NO CT will be shown if the signal from the radio station

is not strong enough or no such service is available.

Press the DISPLAY button on the remote until RT appears.

The text message will start to scroll across the display.

NO RT will be shown if the signal from the radio

station is not strong enough or no such service is available.

1. Press the PTY SEARCH button on the remote, PTY

SELECT will flash on the display.

2. Press the TUNING + /- on the remote to choose the

program type, for example, NEWS, SPORT, etc.

3. Press the PTY SEARCH button again to choose the

program type shown in the display.

4. When the type of program is tuned in, it will stop searching,

otherwise, NOTHING will appear in the display.

PTY SEARCH

POWER

MCS-600

VOLUME

10+

TUNINGTUNING

STATION

TUNER

AUX1

AUX2

DVD

TAPE

LINE IN

ST/MO

PTY

APSMEMAUTO

BASS TREBLE BALANCE

REPEATDISPLAYLOUDNESS

MUTE

DISPLAY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tangent MCS-600 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info