Bedienungsanleitung Tanita BCG-01 (Seite 6 von 12) (Englisch)

659113

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

To ensure accuracy, readings should be taken without clothing and when the

body is consistently hydrated. If you do not undress, always remove your socks

or stockings and be sure the soles of your feet are clean before stepping on the

monitor.

Be sure that your heels are correctly aligned with the electrodes on the monitor.

Don’t worry if your feet appear too large for the monitor, as accurate readings can

still be obtained if your toes overhang the monitor.

It is best to take readings at the same time of day. Try to wait about three hours after

waking, eating, or hard exercise before taking measurements.

While readings taken under other conditions may not have the same absolute

values, they are accurate for determining the percentage of change as long as

the readings are taken in a consistent manner. To monitor your progress, compare

weight and body fat percentage taken under the same conditions over a period of

time.

Note: An accurate reading will not be

possible if the soles of your feet are

not clean, or if your knees are bent or

you are in a sitting position.

Heels centered on

electrodes

Toes may overhang

measuring platform

Handling Tips

This monitor is a precision instrument that utilizes state-of-the-art technology.

Follow these instructions carefully to keep the monitor in the best condition:

• Do not attempt to disassemble the monitor.

• Store the monitor horizontally, and position it so that the buttons will not be pressed accidentally.

• Avoid subjecting the monitor to excessive impact or vibration.

• Place the monitor in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny. Do not

use soap.

• Do not step on the monitor if it is wet.

• Do not drop any objects onto the monitor.

Note: To avoid possible injury, do not step on the edge of the monitor.

Inserting the Batteries

Open the battery cover on the back of the monitor. Insert the supplied AA-batteries as

indicated.

Note: Be sure that the polarities of the batteries are set properly. If the batteries are incorrectly

positioned, battery fluid may leak and damage the floor. If you do not intend to use this

monitor for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries may have decreased energy levels, and should be

replaced with new batteries as soon as possible.

Positioning the Monitor

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe

and accurate measurement.

Preparations Before Use

Getting Accurate Readings

Automatic Shut-down Function

The automatic shut-down function shuts off the power automatically in the following cases:

• If you interrupt the measurement process, the power will shut down automatically within 30 seconds depending upon the type of

operation.

• During programming, if you do not touch any of the keys or buttons within 60 seconds.*

• After you have completed the measuring process.

Open as shown

Battery direction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tanita BCG-01 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info