Bedienungsanleitung Tanita BF-680W (Seite 5 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

545047

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

GBGB

TAKING WEIGHT AND BODY FAT READINGS

UNDERSTANDING YOUR READING

Healthy Range Indicator (Standard Adults only*)

Your body fat monitor/scale automatically compares your body fat reading to

the Healthy Body Fat Range chart.

Following your body fat percentage reading, a black bar will flash along the

bottom of the display, identifying where you fall within the Body Fat Ranges for

your age and gender. For example, if the squares appear above (0) area your

range is within the Healthy Range – if they appear over (-) area, your reading is

below the Healthy Range. For more about the Healthy Range, see page 2.

(-) :

Underfat; below the healthy body fat range. Increased risk for health problems.

(0) :

Healthy; within the healthy body fat percentage range for your age/gender.

(+) : Overfat; above the healthy range. Increased risk for health problems.

(++) : Obese; high above the healthy body fat range. Greatly increased risk

of obesity-related health problems.

Under Healthy Over Obese

1. Select Personal Key and Step On

Using your toe, tap your pre-programmed Personal Key.

(Release the key within 3 seconds or the display will show "Err".)

The unit will beep and the display will show the programmed date.

The unit will beep again and the display will show "0.0".

Now step onto the platform.

Note: If you step onto the platform before “0.0” appears the display will show “Err” and you

will not obtain a reading. Furthermore, if you do not step onto the measuring platform

within about 60 seconds after “0.0” appears, the power is shut-off automatically.

2. Get Your Readings

Your weight will be shown first.Continue to stand on the platform.

"54321" will appear on the display and disappear one by one from right to left.

Your body fat peacentage(%FAT) and Body Fat Range will appear on the

display screen.

Your total body water percentage(%TBW) will appear on the display screen.

The display will then flash your %TBW, weight and %FAT alternately 3 times.

Note:Do not step off until Body Fat % is shown.

3. Recall Function

To obtain previous readings, step off scale and press Up arrow button.

To view current reading, release arrow button.

*Note: If you select Athlete mode, the unit will

not display the Healthy Range Indicator. Athletes

may have a lower body fat range based on their

particular sport or activity.

(Range of user age is between 20-79)

HOW TO DETERMINE BODY FAT PERCENTAGE

GETTING ACCURATE READINGS

Setting and Storing Data in Memory

The unit can be operated only if data has been programmed into one of the personal data memories or the Guest mode.

To ensure accuracy, readings should be taken without clothing and under consistent

conditions of hydration. If you do not undress, always remove your socks or stockings,

and be sure the soles of your feet are clean before stepping on the measuring platform.

Be sure that your heels are correctly aligned with the electrodes on the

measuring platform. Don’t worry if your feet appear too large for the unit -

accurate readings can still be obtained if your toes overhang the platform.

It is best to take readings at the same time of day. Try to wait about three

hours after rising, eating, or hard exercise before taking measurements.

While readings taken under other conditions may not have the same

absolute values, they are accurate for determining the percentage of change

as long as the readings are taken in a consistent manner. To monitor

progress, compare weight and body fat percentage taken under the same

conditions over a period of time.

GUEST

SET

GUEST

SET

Heels centered on

electrodes

Toes may overhang

measuring platform

Note: An accurate reading will not be possible if

the soles of your feet are not clean, or if your

knees are bent or you are in a sitting position.

1. Turn on the Power

Press the Set button to turn on the unit (once programmed, tapping a

Personal Key turns on the unit.) The unit will beep to confirm activation, the

Personal Key numbers (1,2) will be displayed, and the display will flash.

Note: If you don’t operate the unit for sixty seconds after the unit has been turned on, the

unit will turn off automatically.

Note: If you make a mistake or want to turn the unit off before you have finished

programming it, press the Weight-Only Key ( ) to force quit.

2. Select a Personal Key Number

Press the Up/Down buttons to select a Personal Key. Once you reach the

Personal Key number you wish to use, press the Set button. The unit will

beep once to confirm.

3. Set Age

The display defaults to Age 30 (range of user age is between 7-99). An

arrow icon appears on the lower left side to indicate Age setting. Use the

Up/Down buttons to scroll through numbers. When you reach your age,

press the Set button. The unit will beep once to confirm.

4. Select Female or Male

Use the Up/Down buttons to scroll through Female ( ) or Male ( ),

Female/Athlete and Male/Athlete settings, then press the Set button. The

unit will beep once to confirm.

(Athlete Mode : Only for BF-680W)

5. Specify the Height

The display defaults to 5’ 7.0” (170cm) (range of user is from 3’ 4.0” – 7’

3.0” or 100cm – 220cm). Use the Up/Down buttons to specify Height and

then press the Set button. The unit will beep twice and the display will flash

all data (Male/Female, Age, Height, etc.) three times to confirm the

programming. The power will then shut down automatically.

Tanita BF-680W Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info