Instruction manual
1.Name of parts
1) Body
2) Display
3) SET/Arrow (Select) Button
4) Battery (bottom)
5) Reset button
6) Weight Mode Switch
2.Setting up scale
To insert battery
Turn the scale over and remove the battery cover by releasing the latch, (see
fig.2.1) install 4 pieces of new “R6P” or “AA” type Alkaline battery (included)
with correct polarity as indicated (see fig.2.2).
Note: If “Lo”message appears in display when attempting to weigh, replace
the batteries. “Lo” will not appear if battery voltage is too low.
Placing scale
The scale should be used on a hard even surface for accurate weighing. If
surface is carpeted, it is recommended to place masonite under the scale.
3.Set and Store Data
Use the Set button to activate the unit.
Personal Key numbers store your personal data.
Use Up/Down buttons to select height.
Press Set.
4.To use scale
Tap the personal key with your toe. The display will show personal number (fig.3.1).
Wait for the display to show "0.0" (fig.3.2), then step on the scale (fig.3.3).
Current reading in upper display and BMI reading in under display.
Note: “0.0” disappears if you do not step on the scale within 30 seconds.
When you step off the scale, display reading returns to “0.0” and scale will
turn off automatically. “OL” message appears in the display when load
weight is in excess of the weighing capacity.
For weighing accuracy
This scale is a precision instrument and very sensitive to body movement.
For best accuracy, step on the scale gently, relax your body and stand still. It
is normal for your weight to vary during the day. Slight changes in your
weight are generally normal.
5.What is BMI
•BMI (Body Mass Index) is a guideline for determining your appropriate
weight range.
•The BMI value is determined as
BMI=Body weight (kg)/ Height(m)
2
•BMI value of 22 is used as the standard value. Research has shown
people with this figure have fewer health problems.
6.Care Instructions
1.
Do not attempt to open the scale or tamper with its mechanism or circuitry.
These actions will void all warranty coverage.
2. The scale will turn off automatically, after you have stepped off.
3. Take care not to spill water or chemical liquids onto the scale.
Wipe the scale with a damp cloth periodically.
4. Place the scale on a flat and hard surface.
5. If not in use for long term, remove the batteries to prevent damage.
6. “OL” will appear when weight exceeds the scale capacity.
7.Specification
Version kg only kg/lb/st-lb
Capacity 150 kg 330 lb 23 st 8 lb
Min. Grad. 100 g 0.2 lb 0.2lb
Power supply 4 batteries (included)
Power consumption 60 mA maximum
Digital Bathroom Scale
100g / Current&BMI
ENGLISH
