3.Recall Function
The previous readings of the following features can be obtained using the recall function.
・Weight
・Body Fat %
・Total Body Water %
・Muscle Mass
・BMR (kcal/kj)
・Visceral Fat Level
To obtain previous readings, press the SET button while the current readings are being displayed.
The display will show the previous readings.
To see other previous readings, press the Up/Down buttons for each desired reading.
Press the SET button again to go back to the current result display.
Note:For Children (age-5-17), the unit will only display the previous Weight and the Body Fat %.
GB GB
87
TAKING WEIGHT AND BODY FAT READINGS
After programming your personal data you are ready to take a reading.
1. Select Personal Data Number
Press the Up button turn on. Use the Up/Down buttons to select your
Personal data number. Press the Set button to confirm.
(Release the key within 3 seconds or the display will show “Error”.)
The unit will beep and the display will show the programmed data.
The unit will beep again and the display will show “0.0”.
Now step onto the platform.
Note:
•If you step onto the platform before “0.0” appears the display will show “Error” and you will
not obtain a reading. Furthermore, if you do not step onto the measuring platform within
about 30 seconds after “0.0” appears, the power is shut-off automatically.
•When using the “Up” button to turn the unit on, the personal data number last used will
appear first.
•Numbers that are not pre-programmed are automatically skipped.
2.Obtain Your Readings
Your weight will be shown first.
Continue to stand on the platform.
“
00000” will appear on the display and disappear one by one from left to right.
Your Body Fat percentage (%FAT) and Body Fat Range will appear on the
display screen. After your body fat percentage has been calculated, a white bar
will flash the healthy range indicator along the bottom of the display identifying
where you fall within the Body Fat Ranges for your age and gender.
Note:Do not step off until Body Fat % is shown.
Note: For children (age 5-17), the unit will only display the Weight and
the Body Fat %.
To see other readings, carefully step off scale, press the up button
continually to display readings in the order listed below.
(Press the down button for reverse.)
The Up/Down buttons will not function while remaining on scale.
TAKING WEIGHT MEASUREMENT ONLY
Select Weight-Only Key
Press the Weight-only key. After 2 or 3 seconds, “0.0” will appear in the
display and the unit will beep. When “0.0” appears in the display, step onto
the platform. The body weight value will appear.
If you remain on the platform,
the display will flash for about 30 seconds, and then the power will automatically turn off.
If you step off the platform, the weight will continue to show for about 5 seconds, then
“0.0” will appear and the unit will shut off automatically.
PROGRAMMING THE GUEST MODE
The Guest mode allows you to use the monitor without losing the
information already assigned to a Personal Data Number.
To program the Guest mode, use the Down button marked with a “GUEST”
to turn on the power. Then follow steps 3 through 5 in “
Setting and Storing
Data in Memory
” (p.6.) The unit will beep twice and the display will show
“0.0”. Step onto the platform. Next follow the directions for “Get Your
Reading” (p.7).
Note: If you step onto the platform before “0.0” appears the display will show “Error” and
you will not obtain a reading.
