Bedienungsanleitung TaoTronics TT-AC003 (Seite 9 von 19) (Englisch)

803960

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Selection of Installation Location

Basic requirement

Installing the unit in the following places may cause malfunction. If it is unavoidable, please

consult the local dealer:

1. The place with strong heat sources, vapors, ﬂammable or explosive gas, or volatile objects

spread in the air.

2. The place with high-frequency devices (such as welding machine, medical equipment).

3. The place near coast area.

4. The place with oil or fumes in the air.

5. The place with sulfureted gas.

6. Other places with special circumstances.

7. It’s not allowed to be installed on the unstable or motive base structure (such as truck) or in the

corrosive environment (such as chemical factory).

Requirement of complete unit

1. There should be no obstruction near air inlet and air outlet.

2. Select a location where the condensation water can be dispersed easily and won't affect

other people.

3. The location should be able to withstand the weight of the unit and won't increase noise

and vibration.

4. Select a location where the noise and outﬂow air emitted by the outdoor unit will not

affect neighborhood.

5. The location should be able to withstand the weight of unit.

6. Select a location which is out of reach for children and far away from animals or plants. If it is

unavoidable, please add fence for safety purpose.

7. Please try your best to keep far away from ﬂuorescent lamp.

Requirements for Electric Connection

Safety Precaution

1. Must follow the electric safety regulations when installing the unit.

2. According to the local safety regulations, use qualiﬁed power supply circuit and air switch.

3. Please make sure the power supply complies with the requirement of air conditioner. Unstable

power supply or incorrect wiring may lead to electric shock, ﬁre hazard or malfunction.

4. Properly connect the live wire, neutral wire and grounding wire of power socket.

5. Be sure to cut off the power supply before proceeding any work related to electricity and safety.

6. Do not put through the power before ﬁnishing installation.

7. The air conditioner is ﬁrst class electric appliance. It must be properly grounding with

specialized grounding device by a professional. Please make sure it is always grounded

effectively, otherwise it may cause electric shock.

8. The yellow-green wire or green wire in air conditioner is grounding wire, which can't be used

for other purposes.

9. The grounding resistance should comply with national electric safety regulations.

Install Your Air Conditioner

Step 1: Install Top Mounting Rail

1. Tear off the paster at back side of top mounting rail seal strip, and then align it at the bottom

edge of top mounting rail to stick the top mounting rail seal strip at the bottom of top

mounting rail.

2. Use 4 type A screws to ﬁx the top mounting rail at the outer case of air conditioner.

top mounting rail

seal strip

type A screw

01 03 05 07 09 11 13 15

17 19 21 23 25 27

02 04 06 08 10 12 14 16

18 20 22 24 26 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-AC003 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info