803848
7
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Low Water Protection: Auto Shut-off the Humidier
When there is not enough water inside the water reservoir, the humidier will stop misting and
a waterless icon will light up on the display. It is designed for safety to prevent the humidier
from possibly overheating and damaging the atomizer.
10
09
TIMER
NIGHTLIGHT/SLEEP
ON/OFF
MIST+/-
HUMIDISTAT
Connect to a power source, all the indicators on the LED display will ash once. The unit is in
standby mode now with the LED display showing the environment humidity level.
ON/OFF
1. Press the Power Button once to enter medium level misting by default. The LED display will
show the mist level and environment humidity level.
2. Press again to stop misting, the fan will continue working for 5 minutes to dry the mist tube.
Power On / Off
MIST+/- Mist Adjustment
When the unit is on, press the Mist Button to adjust the mist between low / medium / high
levels.
TIMER Timer Setting
Press the Timer Button to set the timer from 1 hour to 24 hours, the timer will ash three times to
conrm your setting. Once set, the LED display will show the countdown timer and the
environment humidity level alternately. When time is up, the unit will automatically turn off.
NIGHTLIGHT/SLEEP
Nightlight / Sleep Mode
1. Press the Nightlight Button / Sleep Button once to turn on the nightlight.
2. Press it again to enter sleep mode with the mist level switching to low level. All the indicators
on the LED display will turn off except the sleep indicator.
3. In sleep mode, all the other buttons remain functional.
4. Press one more time to exit sleep mode.
HUMIDISTAT Humidity Setting
1. Press the Humidity Button to set the humidity level from 30% to 95% with an increase /
decrease of 5% in each tap.
2. The humidity level set will ash three times to conrm your setting.
3. The unit will stop misting once the environment humidity reaches the preset humidity level
and resume misting once the environment humidity level is below the preset level.
4. To exit the humidity setting, press the Humidity Button one more time when humidity is set to
95% or restart the unit.
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist
as needed.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TaoTronics TT-AH001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info