Bedienungsanleitung TaoTronics TT-AH018 (Seite 7 von 13) (Englisch)

803890

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Low Water Protection: Auto Shut-off the Humidiﬁer

The unit will turn off automatically when water has been depleted. The low water indicator “Err” on

the LED display will light up.

Tap the Power Button to start (default: medium mist level) / stop misting with a beep sound with each

Power On / Off

1. When turned off, although the unit stops working, the fan will continue working for 3 minutes

to avoid generation of mildew in the mist tube.

2. When turned off, the LED display will dim to half of the brightness if there is no operation in 3

seconds.

Tap the Mist Button to adjust the mist output between high / medium / low levels, the mist level

indicator on the LED display will light up accordingly.

Mist Adjustment

Tap the Warm Mist Button to adjust the heat level between high / medium / low levels. When the

heat level is at high level, tap the Warm Mist Button one more time to turn off the heating. The

corresponding warm mist level indicator on the LED Display will light up.

Warm Mist Adjustment

1. Tap the Sleep Button to enter sleep mode. The LED display will show “ZZZ”.

2. The beep sound is disabled in sleep mode and the LED display will turn off if there is no operation

in 3 seconds. Tap any button (except the Power Button) to wake it up.

3. The unit will enter low mist level automatically, while the mist, humidity, and timer settings remain

functional. The warm mist mode is disabled.

4. Tap the Sleep Button again to turn off the sleep mode with “ZZZ” showing on the LED display.

Sleep Mode

1. Tap the Humidity Button to set the humidity level from 30% to 95% with an increase of 5% with

each tap.

2. Once set, the humidity level on the LED display will ﬂash 3 times to conﬁrm your setting.

3. When the humidity level is at 95%, tap the Humidity Button one more time to cancel the humidity

setting, the LED display will show “-- --%“.

4. Or you can turn off the humidity setting at any time by tapping and holding the Humidity Button

for 2 seconds.

Humidity Setting

The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as

needed.

1. Tap the Timer Button to set the timer from 1 hour to 12 hours with an increase of 1 hour with each

tap. Once set, the timer indicator on the LED display will ﬂash 3 times to conﬁrm the setting.

2. When the timer is at 12 hours, tap the Timer Button again to turn off the timer. Or you can turn off

the timer at any time by tapping and holding the Timer Button for 2 seconds.

Timer Setting

Memory Function

If power is not disconnected, the unit will remember the mist level setting of the last time when it was

turned off.

High Temperature Alarm

High temperature alarm will be activated if temperature of the heat tube is too high, 8 beep sounds

will be heard every other second. The unit will stop working after 1 minute.

Caution: Unplug the power source and wait for 3 minutes to allow the unit to cool down before you

turn it on again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-AH018 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info