803924
9
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
1312
TROUBLESHOOTING
The following troubleshooting guide addresses the most common problems. If problems persist,
feel free to contact the Customer Support at support@taotronics.com.
Problem Possible Causes Solution
Filter Change
Indicator does not
disappear
The air purifier has been reset
incorrectly
Replace the filter and reset by
pressing and holding the Timer
and Auto Buttons for 3 seconds
Air purifier does
not power on or
respond to button
controls
Unit is not plugged in or the
power socket is not switched on
Power socket is not
working properly
Power cord is damaged
Air purifier is malfunctioning
Connect the plug to a powered
electrical outlet
Try plugging the air purifier into
a different outlet
Immediately stop using and
contact TaoTronics Support Team
Contact TaoTronics Support Team
Insufficient air flow
Fan speed is on low setting
Filter packaging has not
been removed
Not enough free space around
the unit to ensure ventilation
Filter is clogged and not replaced
Press Fan Speed Button to
adjust the fan speed
Remove the filter from its
packaging before use
Leave 15 in / 38 cm of clearance
for proper air flow
Replace the filter
Poor air
purification quality
Room size exceeds the expected
size the unit covers
Air intake or outlet is blocked
Filter is not properly placed
inside the housing
Filter is dirty and cannot produce
fresh air anymore
Not enough free space around
the unit to ensure ventilation
Select the right air purifier as
per the actual room size
Remove objects blocking air
intake or outlet
Properly place the filter (see
Replacing the Multifunction Filter)
Replace the filter (see Replacing
the Multifunction Filter)
Leave 15 in / 38 cm of clearance
for proper air flow
Excessive noise
Filter packaging has not been
removed
Foreign objects inside the unit
Unit is placed on an
uneven surface
Remove the filter from its
packaging before use
Immediately discontinue use
and contact TaoTronics Support
Team. DO NOT attempt to open
the air purifier
Place the unit on a level
and flat place
Producing an
unpleasant odor
Filter is dirty and cannot
produce fresh air any more
High humidity levels have
caused mildew to grow
on the filter
Replace the filter (see Replacing
the Multifunction Filter)
Replace the filter, and move the
air purifier to a room where the
relative humidity is less
than 85% RH
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TaoTronics TT-AP007_ wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info