Bedienungsanleitung TaoTronics TT-BA07 (Seite 6 von 26) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

803876

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Pair in RX mode:

Press and hold the Power Button of the adapter for 5

seconds (LED indicator ﬂashes blue slowly). It will

start pairing 5 seconds after being powered on (LED

indicator ﬂashes red and blue alternatively).

1. Activate the Bluetooth® function on your phone

and search for the nearby Bluetooth® devices:

• For iOS: Settings > Bluetooth® > On

• For Android: Settings > Wireless & Networks >

Bluetooth®: On > Scan for devices

2. Find “TaoTronics TT-BA07” in the search results and

tap on it to connect. Once connected, the LED

indicator will turn solid blue.

Note:

• The adapter enters pairing mode automatically

when powered on for the ﬁrst time.

• The original pairing memory will be cleared after

a mode switch. It will automatically start pairing

each time it’s powered on.

• If a PIN code is required for pairing, try 0000

(four zeroes), 8888 (four eights), 1111 (four ones),

or 1234.

• The adapter can remember previously paired

devices and will attempt to pair with devices

automatically, without going into pairing mode.

Pair with two devices at the same time

In TX mode:

In TX mode, the adapter is able to pair with two Bluetooth®

stereo earphones/speakers at the same time.

1. Follow the previous instructions in the “Pairing” section

to pair the TT-BA07 with your ﬁrst device.

2. Turn off the Bluetooth® function on your ﬁrst device,

tap the Power Button twice to pair and connect to your

second device.

3. Turn on the Bluetooth® function on your ﬁrst device.

In approximately 30 seconds, the ﬁrst device will

automatically connect in.

Note:

• When you pair with two devices, both can play

music at the same time.

• The adapter will automatically re-pair when

powered on.

In RX mode:

In RX mode, the adapter is able to pair with two Bluetooth®

devices at the same time.

1. Follow previous instructions in the “Pairing” section to

pair the TT-BA07 with your ﬁrst device. Disable the

Bluetooth® function on your ﬁrst device. Tap the Power

Button twice to pair with the second device.

2. Turn on the Bluetooth® of the ﬁrst device, now TT-BA07

adapter is successfully paired with both devices.

Note:

• Only one device can play music at any time. You

have to stop the music on one device to play on

the other.

• The adapter will automatically re-pair when

powered on.

Care and Maintenance

• Keep the adapter away from heat and humidity.

• Do not expose the adapter to direct sunlight or

extreme heat.

• Do not try to take the adapter apart. It may cause serious

damage.

• Do not drop or knock the adapter on hard surfaces as

it damages the interior circuit.

• Do not use chemicals or detergents to clean the product.

• Do not scrape the surface with sharp objects.

05 06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-BA07 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info