Bedienungsanleitung TaoTronics TT-BH053 - SOUNDLIBERTY 53 (Seite 7 von 45) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

803845

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

05 06

Power On (Fig. 8)

Take out the earbuds from the charging case, they will power on

automatically.

L R

Power Off (Fig. 9)

Place the earbuds into the charging case, they will turn off automatically.

L R

Pairing

• You can use one earbud or both earbuds as per your preference. Please

refer to the corresponding pairing instructions.

• Before pairing, please turn off other Bluetooth devices and place the device

to be connected close to the earbuds.

• When the earbuds are disconnected from your device for more than 10

minutes, they will turn off automatically.

Couple Earbuds Mode

1. Take the earbuds out of the charging case. They will connect with each

other automatically. The LED indicators on both earbuds will ﬂash blue

once. Then the LED indicator on both earbuds will ﬂash blue and white

alternately indicating the earbuds are in pairing mode now.

2. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap

on the name to connect.

3. Once connected, the LED indicators on both earbuds will ﬂash blue slowly.

Note: It is not recommended to wear the two earbuds on different people. If

needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple

earbuds mode.

Single Earbud Mode

1. Take out one earbud from the charging case, it will enter pairing mode with

the LED indicator ﬂashing blue and white alternately.

2. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 53”in the searching results, tap

on the name to connect.

3. Once connected, the LED indicator will ﬂash blue slowly.

Note:

If you want to change to couple mode, simply take out the other earbud from

the charging case, they will pair with each other automatically.

Restore to Factory Settings

If you failed to pair your device with the earbuds, please restore them to

factory settings as instructed below:

1. Take the earbuds out of the charging case, then place them back again.

Tap and hold the Multifunction Touch Control of both earbuds for 10

seconds until the LED indicators ﬂash three times to enter reset mode.

2. If you have paired your device with the earbuds before, remove

"TAOTRONICS SoundLiberty 53" from the bluetooth device list and pair

again.

3. Take out both earbuds, and they will pair with each other automatically. Pair

them with your device when the LED indicator on the right earbud ﬂashes

blue and that on the left earbud ﬂashes blue and white alternately.

Note:

If you want to pair the earbuds with another device when you have already

paired them with a device, deactivate the Bluetooth function on the paired

device or clear “TAOTRONICS SoundLiberty 53” from its Bluetooth list.

Restore the earbuds to factory settings as instructed above if pairing failed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-BH053 - SOUNDLIBERTY 53 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TaoTronics TT-BH053 - SOUNDLIBERTY 53

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info