Bedienungsanleitung TaoTronics TT-BH092 - SoundLiberty 92 (Seite 7 von 44) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

803900

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

05 06

Power On (Fig. 7)

Uncover the lid and they will power on automatically.

Power Off (Fig. 8)

Put the earbuds into the charging case and close the lid, they will turn off

automatically.

Pairing

• You can use one earbud or both earbuds as per your preference. Please

refer to the corresponding pairing instructions.

• Before pairing, please turn off other Bluetooth devices and place the device

to be connected close to the earbuds.

• When the earbuds are disconnected from your device for more than 10

minutes, they will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid to turn on the earbuds, they will connect with each other

automatically. The LED indicators on both earbuds will ﬂash blue and white

alternately indicating the earbuds are in pairing mode now.

2. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

3. Once connected, the LED indicators on both earbuds will ﬂash blue slowly.

Note:

• The earbuds can remember the devices paired previously, and will attempt

to pair with the last connected device. If re-pairing failed, the earbuds will

enter pairing mode.

• It is not recommended to wear the two earbuds on different people. If

necessary, please keep the two earbuds close to each other in couple

earbuds mode.

Single Earbud Mode

1. Take out one earbud from the charging case, and make sure the other one

is placed in the charging case and the lid is covered.

2. It will try to pair with the last paired device ﬁrst then enter pairing mode

with its LED indicator ﬂashing blue and white alternately if pairing failed.

3. Turn on the Bluetooth function on your device and search for nearby

devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap

on the name to connect.

4. Once connected, the LED indicator will ﬂash blue slowly.

Note:

If you want to change to couple mode, simply take out the other earbud

from the charging case, they will pair with each other automatically.

Clear Pairing List

If you failed to pair your device with the earbuds, please clear the pairing

history as instructed below:

1. Put the earbuds back into the charging case, close the lid then open it.

2. Press and hold the Reset Button for 10 seconds until the LED indicators on

the earbuds and the charging case ﬂash white three times.

3. If you have paired your device with the earbuds before, remove

"TAOTRONICS SoundLiberty 92" from the Bluetooth device list and

pair again.

4. Re-pair with your Bluetooth® device as instructed in “Pairing” section.

Note:

If you want to pair the earbuds with another device when you have already

paired them with a device, deactivate the Bluetooth function on the paired

device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth list.

Restore the earbuds to factory settings as instructed above if pairing failed.

L R

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-BH092 - SoundLiberty 92 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TaoTronics TT-BH092 - SoundLiberty 92

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info