Bedienungsanleitung TaoTronics TT-EE015 (Seite 8 von 16) (Englisch)

803901

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

09 10

Auto Pump Drain Mode

Press to activate the Auto Pump Drain func-

tion. When the water bucket is full, the drain

pump will automatically pump the water out

of the bucket to the drain. For detailed infor-

mation, please see “Continuous Water Drain-

age – Using the Auto Pump Drain Option”

section.

Comfort Button

Press to turn the comfort function on/off. Un-

der this mode, the humidity cannot be adjust-

ed manually but will be preset to a recom-

mended comfortable and healthy level based

on the ambient temperature.

Ambient Tem-

perature <65 °F 65 -77

°F

>77

°F

Relative Hu-

midity 55 % 50 % 45 %

Filter Button

When the Filter indicator is ON, it is time to

clean the ﬁlter. Switch the unit OFF and care-

fully remove the ﬁlter from the unit and clean.

The Filter indicator will ﬂash after 250 hours

of operation. To reset after cleaning the ﬁlter,

press the Filter button and the indicator will

go off.

Humidity Setting

Set the humidity level within a range of 35% to

85%RH in 5% increments.

For drier air, press < button to set a lower

RH%.

For damper air, press > button to set a higher

RH%.

Timer Setting

Press < or > button to set Auto Start and Auto

Stop timer from 0.0 to 24.

Continuous Button

Press to activate the Continuous Mode, the

unit will dehumidify continuously.

Turbo Button

Press to control the fan speed: High or Normal

fan speed. When the Turbo indicator is on, the

unit is running at High fan speed.

Timer Button

Press to activate Auto Start and Auto Stop fea-

ture. Then press < or > button to set the timer

from 0.0 to 24.

Auto Stop Timer:

When the unit is ON, press the Timer Button,

the OFF indicator will be illuminated. Then

press < or > to set the number of hours (0.5-

24 hours) you want the unit to run before it

switches off.

Auto Start Timer:

When the unit is OFF, press the Timer Button,

the ON indicator will be illuminated. Then

press < or > to set the number of hours (0.5-

24 hours) you want the unit to start running au-

tomatically.

Note: When one of the above

malfunctions occurs, turn off the

dehumidifier, and check for any

obstructions. Restart the unit, if the

problem still persists, turn off the unit

and unplug the power cord. Contact

the Customer the Customer Support

at support@taotronics.com for repair

and/or replacement.

Auto Defrost

When frost builds up on the evaporator coils,

the internal compressor will turn off and the

fan will continue to run until the frost has melt-

ed. Once the internal coils have defrosted and

dried, the compressor or fan will automatically

restart and dehumidifying will resume.

Water Bucket Full / Not Secured

Properly In Place

When the water bucket is full or not secured

properly in place, the indicator will be illumi-

nated. To switch off the indicator, empty the

water bucket and place it in the right position.

Note: In 5 seconds without operation,

the Timer starts function. Then the LED

display will show the previous humidity

setting.

To cancel Timer settings, turn the unit

ON or OFF at any time or adjust the tim-

er setting to 0.0.

When code “P2” is displayed, the Auto

Start / Stop function will also be can-

celled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TaoTronics TT-EE015 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info